• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

Thegrandwazoo

Active member
Joined
Nov 1, 2014
Messages
27
Location
West By-God Virginia
I don't think the P-style or the J-style pickup appear to be standard P- or J-size. I'm sure someone around here can confirm or disprove, but to my eye they look to both be MM-specific, and as wide as my Sterling's single-coil, which I'm pretty sure isn't as wide (tall? High? You know what I mean) as a J, and way different than a P.
 

Thegrandwazoo

Active member
Joined
Nov 1, 2014
Messages
27
Location
West By-God Virginia
I'm curious about the Caprice neck. Several interweb reviewers have stated that it had the Sterling neck, but the finish on the back and the long headstock means that's at least partially erroneous (plus I think it's 21 frets, but could be mistaken). I asked elsewhere if the necks were interchangeable, but that's before I figured out that they (probably) aren't. I wonder if anyone could report on the 'satiny-ness' of the satin, and how it stacks up against the unfinished maple. The neck is why I bought my Sterling, the tone was almost just a bonus. I want a Caprice pretty hard in theory, but if I'm going to have to mutilate a really nice bass with sandpaper to make it suit me, I'd be potentially more inclined to build something, maybe. Then again...
 

Grugenhagen

Well-known member
Joined
Mar 28, 2015
Messages
116
Location
Minneamapolips, MN
I wonder if anyone could report on the 'satiny-ness' of the satin, and how it stacks up against the unfinished maple. The neck is why I bought my Sterling, the tone was almost just a bonus. I want a Caprice pretty hard in theory, but if I'm going to have to mutilate a really nice bass with sandpaper to make it suit me, I'd be potentially more inclined to build something, maybe. Then again...
I own both a Caprice and a Sterling and love them both. The Caprice neck is very satiny smooth.. If it wasn't, I wouldn't have bought it as I hate glossy necks and anything that is remotely sticky. The Sterling remains my favorite bass neck but I find the difference in feel between the two to be very small.

Your mileage may vary, of course, but I think you'll like it.
 

Thegrandwazoo

Active member
Joined
Nov 1, 2014
Messages
27
Location
West By-God Virginia
Well, that sorta sucks, haha! I've wanted a passive Sterling for a long time, and now it looks like I may have no alternative but to buy one of these bastidges as soon as I can to replace my Japanese Fender, since I've never loved its feel a fraction as much as my Sterling's. Good thing I don't have kids with college funds.
 

41hz

Active member
Joined
Jan 5, 2017
Messages
27
I really love the feel of the necks on these basses, but what grabbed me was the tone. Very warm with nice clean highs!
 

JDguitar

Well-known member
Joined
Mar 11, 2012
Messages
68
Does anyone know if any Caprice basses are available in stores in Ontario Canada? It seems as though Long & McQuade took over most stores and are mostly pushing Fender. I'd really like to demo a Caprice. Thanks.
 

41hz

Active member
Joined
Jan 5, 2017
Messages
27
I'm curious about the Caprice neck. Several interweb reviewers have stated that it had the Sterling neck, but the finish on the back and the long headstock means that's at least partially erroneous (plus I think it's 21 frets, but could be mistaken). I asked elsewhere if the necks were interchangeable, but that's before I figured out that they (probably) aren't. I wonder if anyone could report on the 'satiny-ness' of the satin, and how it stacks up against the unfinished maple. The neck is why I bought my Sterling, the tone was almost just a bonus. I want a Caprice pretty hard in theory, but if I'm going to have to mutilate a really nice bass with sandpaper to make it suit me, I'd be potentially more inclined to build something, maybe. Then again...

Caprice neck is much better to me than the unfinished maple. Those necks never really did it for me. That dry feel is not my thing. The caprice is the happy medium, as that satin finish really makes the neck play quite nicely. I am sure you can probably treat the unfinished maple the same way and it would be great.

I personally was sold on the Stingray classic neck. Gloss finish that is not sticky at all. Rather amazing and impressive. But that is more my thing in terms of preference. When I compare the Caprice to that, I still really liked the playability of the satin neck. The one thing about the Caprice that doesn't stack up to the Classic Ray is the frets. I much prefer smaller frets. But even with that caveat, I still love the Caprice neck a lot and think you will too.
 

Thegrandwazoo

Active member
Joined
Nov 1, 2014
Messages
27
Location
West By-God Virginia
Everyone's different, but I've always loathed gloss-finished necks. Without realizing unfinished maple was available on MMs, I've always sanded down the finish (to bare wood in the case of maple) on the back of the necks of all my stringed instruments. The first time I fondled a Sterling, I knew I had to have one. I've felt a lot of satin-finished necks I liked just fine (even some glossy ones, but they wouldn't long remain so if I owned them), but nothing's ever been as sweet to me as that raw, slick maple. It gets better the more I play it, too, as did my buddy's Zakk Wylde Les Paul (also oiled maple, if I'm not mistaken).

If EBMM is applying it, I've no doubt the satin is as good as it can be. I just wish EBMMs weren't so unobtainium in my general area, then I could just give one a feel and not have to wonder. Even though I can't really justify yet another nice instrument (I'm just a hobbyist, playing at impromptu funk/fusion/rock jams at get-togethers, an occasional piddly gig thrown together once in a blue moon), I REALLY want one of these things. If they actually had the exact same neck, I'd just order one sight-unseen as soon as my billfold allows, as quality seems to be a non concern with EBMMs. Every one I've played has been just as solid as anything I've felt, with the exception of a badly neglected pre-EB Stingray.

As far as frets are concerned, I like to either go big or go home, as they say. I like big whoppin jumbos or fretless, though my Fender plays just fine with regular sized fretwire, so I can certainly tolerate normal too. I think the Caprice has tall, narrow frets, which my left hand can't tell from tall, wide ones.

Another thought occurs to me: with that itty-bitty body, lighter weight than my (PERFECTLY-balanced) Sterling, the bigger headstock, and heavy tuners, I wonder if it'd be a neck-diver? I suppose some Hipshots, coupled with my preference for soft, wide, leather straps would probably fix it if so. It did on a feather-light 70s P I had briefly a few years ago, and the Caprice is no doubt better-designed, ergonomically speaking.
 

muggsy

Well-known member
Joined
Nov 19, 2004
Messages
787
Location
Alexandria, VA
I saw a Caprice at Bass Central when I was in Florida a couple of weeks ago, and got to mess around with it for a few minutes. Really nice instrument, comfortable fast neck and easy to play. If I didn't already have a great P/J bass I'd be very interested.
 

muggsy

Well-known member
Joined
Nov 19, 2004
Messages
787
Location
Alexandria, VA
As always, your logic is impeccable. Nonetheless, I've been trying to teach my kids that it's better to appreciate the stuff they already have, rather than focusing on the stuff they don't. I'm having limited success with them, but the message has seeped into my consciousness and left me largely GAS-free for a while now. Particularly since I am well aware that my limitations as a bass player have nothing to do with the instruments I play. If I had a lot more money, though, I'd buy more gear, and a Caprice would be on the list. Along with an anniversary SR5 and a Game Changer, because why the hell not? But till then, I'll have to make do with the basses in my sig, all of which are awesome.

And if you get a Caprice, I will happily read about it and look at the pictures.
 
Top Bottom