• Ernie Ball
  • MusicMan
  • Sterling by MusicMan
Status
Not open for further replies.

spectorbassguy

Well-known member
Joined
Feb 19, 2004
Messages
1,392
Location
Central Iowa
My GrapeRay SR5 came with Schaller Straploks on it and guess what? Both screws were very loose. :eek: Every time I've tried Schallers in the past they have come loose exactly like this. First thing I did was to change to Dunlops. My endorsement of Dunlops is further strengthened.
 

cgworkman

Well-known member
Joined
Apr 3, 2004
Messages
1,628
Location
U.S.A.
I'm using both and never had a problem with either.

I think the Schaller design is easier to get in and out of.
 

tkarter

Well-known member
Joined
Jun 22, 2004
Messages
5,921
Location
Kansas
I use Schaller never had a problem really. Hey if you would like to sell those drop me a line.

Dunlop doesn't seem to be available here bouts. I don't play until I have straplocks on a bass.

tk
 

spectorbassguy

Well-known member
Joined
Feb 19, 2004
Messages
1,392
Location
Central Iowa
tkarter said:
I use Schaller never had a problem really. Hey if you would like to sell those drop me a line.

Dunlop doesn't seem to be available here bouts. I don't play until I have straplocks on a bass.

tk

Dude PM me and I'll just send 'em to ya free!
 

crazybass888

Well-known member
Joined
Apr 23, 2004
Messages
282
Location
Atlanta, GA
I've been using Dunlops for years after having several problems w/ Schallers. Its a no brainer if you look at the basic design of both.
 

TSanders

Well-known member
Joined
Jun 9, 2004
Messages
3,535
Location
Columbus, GA
Im a Dunlop guy. They were the first set of locks I got, and I like them so I have stuck with them. Every bass and guitar I have wears tham.
 

nismaniac

Well-known member
Joined
Jun 6, 2004
Messages
228
Location
Oklahoma
For those that have installed Straplocks----------

When you installed the straplocks were you able to use the original screw in the new straplocks or did you have to use the one they provided? If possible I would want to use the original screw just to prevent striping out the hole. Thanks for the info.
 

Aussie Mark

Well-known member
Joined
Nov 9, 2003
Messages
5,646
Location
Sydney, Australia
Both Dunlop and Schaller straplock pins use "small head" screws that fit into the recessed cavity of the straplock. I've yet to find a guitar/bass where the original strap pin screw will fit the straplock cavity. Unless you own a mint historic collectable instrument, you're not going to adversely affect resale value by fitting straplocks. In fact, having straplocks fitted would be regarded as a benefit by the average buyer. For one, it shows that you care about your instrument and that it hasn't been dropped ;)

In most cases the straplock screw fits the original hole, although sometimes it's a tight fit, so a properly fitting screwdriver is essential. You can also make it easier to screw the slightly heavier gauge straplock screw into the hardwood body by lubricating the screw with wax or soap (non liquid) first.

All my basses have Dunlop straplocks fitted, and I've kept all the original strap pins, so if a potential buyer gets hung up on having the original strap pins, I can just refit them before sale. Too easy.
 

nismaniac

Well-known member
Joined
Jun 6, 2004
Messages
228
Location
Oklahoma
Aussie Mark said:
Both Dunlop and Schaller straplock pins use "small head" screws that fit into the recessed cavity of the straplock. I've yet to find a guitar/bass where the original strap pin screw will fit the straplock cavity. Unless you own a mint historic collectable instrument, you're not going to adversely affect resale value by fitting straplocks. In fact, having straplocks fitted would be regarded as a benefit by the average buyer. For one, it shows that you care about your instrument and that it hasn't been dropped ;)

In most cases the straplock screw fits the original hole, although sometimes it's a tight fit, so a properly fitting screwdriver is essential. You can also make it easier to screw the slightly heavier gauge straplock screw into the hardwood body by lubricating the screw with wax or soap (non liquid) first.

All my basses have Dunlop straplocks fitted, and I've kept all the original strap pins, so if a potential buyer gets hung up on having the original strap pins, I can just refit them before sale. Too easy.

Cool, thanks for the info. I just get worried about that screw hole getting stripped out. My warwick came with built-in recessed dunlop straplocks. I like them alot, I just haven't installed any on my other basses yet.
 

tkarter

Well-known member
Joined
Jun 22, 2004
Messages
5,921
Location
Kansas
I have found the screws on the Schaller straplocks are smaller diameter than the original screws were. A toothpick in the hole and then insert the Schaller screw. Never had one work loose yet. I also don't add any glue with the toothpick.

I haven't even seen a Dunlop straplock. Not sold in the shops around here and like I said I don't sling a bass without straplocks. Dropped a guitar once a long time ago and seen the light.

tk
 

xshawnxearthx

Well-known member
Joined
Jun 23, 2004
Messages
136
Location
new ****ing jersey
i like the dunlops. i had them on my first guitar, and for years i used the dimazzio strap system with the clips, that was honestly the best, but when i went to go buy my new bass, they didnt have any, so i grabbed the dunlop ones. besides the fact that they rattle with thinner straps, they are by far the best ones. my guitar player has dunlops on one guitar, and schaler on the other, the schalers have popped off and or come un done, numerous times on stage.



also, when putting on strap locks, i usually put a tiny bit of super glue on the tip of the scre before i put it in, it seems to help them all.
 

midopa

Well-known member
Joined
Jan 24, 2004
Messages
3,850
Location
*
Honestly, I haven't had any problems with stock strap buttons so far. I've been playing bass for around three years now, which I know is far less than the majority of you guys, but I honestly haven't had any problems! The stock strap buttons on the StingRay I had for the briefest of time were fine and the strap buttons on my ESP B-205 have been true warriors the entire three years. Hm... I think I know what the problem is... You guys jump around stage too much, that's what! :p
 
Status
Not open for further replies.
Top Bottom