• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

JT3

Active member
Joined
Feb 14, 2003
Messages
29
Location
N.NJ
Does anyone have the wiring diagram? The only one I can find is off another site and I'm not sure it's correct.
Thanks guys
 

GWDavis28

Well-known member
Joined
Jun 23, 2003
Messages
12,754
Location
Mass
Is this what you are looking for??

cfd_evh.gif


Glenn |B)
 

INMT

Well-known member
Joined
Jun 25, 2007
Messages
735
Location
Montana
Why does it seem almost everytime someone asks for a wiring dagram/schematics people post control layout diagrams?
 

GWDavis28

Well-known member
Joined
Jun 23, 2003
Messages
12,754
Location
Mass
Why does it seem almost everytime someone asks for a wiring dagram/schematics people post control layout diagrams?

Cause that's all that's available on the site. It could be a good starting point, sometimes, a little bit of info helps.

Glenn |B)
 

beej

Moderator
Joined
Aug 16, 2004
Messages
12,340
Location
Toronto, Canada
Why does it seem almost everytime someone asks for a wiring dagram/schematics people post control layout diagrams?
Hey man, Glenn was just trying to be helpful. He's right, it's all that's available on the web.

Why is it that people always ask this question w/o first emailing the CS guys who will email one out?
 

GWDavis28

Well-known member
Joined
Jun 23, 2003
Messages
12,754
Location
Mass
keeping my thoughts to myself.

Don't man, you can never have enough info from my point of view.

You asked and I explained, didn't mean to beat you up, if you felt that way, please don't man it's all good.

Glenn |B)
 

GWDavis28

Well-known member
Joined
Jun 23, 2003
Messages
12,754
Location
Mass
Hey man, Glenn was just trying to be helpful. He's right, it's all that's available on the web.

Why is it that people always ask this question w/o first emailing the CS guys who will email one out?

Beej, because the average CS won't give it out or just won't respond.

Glenn |B)
 

INMT

Well-known member
Joined
Jun 25, 2007
Messages
735
Location
Montana
Don't man, you can never have enough info from my point of view.

You asked and I explained, didn't mean to beat you up, if you felt that way, please don't man it's all good.

Glenn |B)

Far from it actually. The net sucks for sarcasm.
Nothing on the net has ever angered me, no point to it.

To explain it in more detail. My point of view is this on this topic:
If a person is asking for a "wiring schematic" they want that particular "item"
If the Control diagram did it for them as in they could figure out the wiring just by reding what the control layout was they would have not asked for the "wiring diagram" in the first place (there are exceptions I'm sure) .
The control lay out is plain enough that most of us can figure out the wiring easily enough, especially since Dimarzio has the wire color chart on their website....but when some asks they typicall want what they asked for.

I equate it to this, you ask for the "wiring schematic" for something and get the "users quick guide". Everyone meaning well but still not getting the job done.
Here's a starting point for wiring diagram
wd2hh3t10_00.jpg
 
Last edited:
Top Bottom