Ernie Ball VP JR Volume Pedal Help

[SGSlidedawg]

Hi All,

Hey, I had to conduct maintenence on my VP JR Volume pedal where I changed the volume Pot. While doing so, my wires that were soldered onto the back of the terminal where the "IN/OUT" guitar cables and tuner cable connect to broke off. All three of them!! Does anyone know the wiring sequence on this so I can solder them back on the terminal. Better yet, post or send me a picture of the wires soldered onto the terminal. Thanks!!




SGSlidedawg

 

[Jodizzle]

SG,
shoot me an email and let me know what you need ..

 

[SGSlidedawg]

Thanks Jodi!!

Thanks Jodi for your help with the VP JR Volume pedal. I just soldered the wires and it works like brand new. I really appreciate your help!

Be safe and rock on!

SGSlidedawg aka Ed

When in doubt, play an E7b5#11-13... etc

 

[Jodizzle]

Ed, absolutely! My pleasure .. stick around .. these forums have been proven to be quite addictiing as Koogs would say Glad we got it figured out lol

 

[ivarerik]

Vp jr

I have the same problem as SGSlidedawg. So i need a picture of the wires soldered onto the terminal. Can someone of you send me an email with a picture or some kind of description. My email : [email protected]

Best wishes/ Erik

 

[beej]

Best bet is to email EB customer support. They're closed Fridays btw.