Pineweasel
Active member
- Joined
- Jul 1, 2017
- Messages
- 29
I recently bought a used Stingray 5 which arrived with an incredibly low action. Having set it up it to the factory specs shown in the EBMM FAQ I'm very happy with it except for one thing; I'm getting buzzing behind the fretted B on the E string if I also play a D on the G string, due to sympathetic resonance of the E string between the fingered note and the nut.
I've double checked the neck relief, action and frets and am 99% certain it's being caused by the nut slot being cut too low.
I've found a few common specs online for setting bass nut slot height, and my measurements are consistently lower, so I'm going to get hold of a new nut. But I'm interested in what specification is used by EBMM themselves when initially filing the slots. Does anybody know?
I've double checked the neck relief, action and frets and am 99% certain it's being caused by the nut slot being cut too low.
I've found a few common specs online for setting bass nut slot height, and my measurements are consistently lower, so I'm going to get hold of a new nut. But I'm interested in what specification is used by EBMM themselves when initially filing the slots. Does anybody know?
