• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

spoonbelly

New member
Joined
Nov 4, 2024
Messages
2
Location
Dutchess Co. NY
Back in 1977 I bought a new MMSRBass. A few years after I noticed that the sunburst finish was starting to get cracks. Then the finish pieces started to chip off. There are two spots where this has occurred. Has anyone one else found this on their MM guitar or bass?? The bass is in new condition, 47 years old, and has this problem. I have put tape over the two areas hoping it stays that way. It usually starts off at the edges
 

Rod Trussbroken

Moderator
Joined
Jul 25, 2002
Messages
5,208
Location
Bris Vegas. AUSTRALIA.
Back in 1977 I bought a new MMSRBass. A few years after I noticed that the sunburst finish was starting to get cracks. Then the finish pieces started to chip off. There are two spots where this has occurred. Has anyone one else found this on their MM guitar or bass?? The bass is in new condition, 47 years old, and has this problem. I have put tape over the two areas hoping it stays that way. It usually starts off at the edges
Pre-EB MM had a Poly finish around that time which was susceptible to cracking, and more so if the instrument was exposed to extreme changes in temperatures. Do you have some pics?
 

spoonbelly

New member
Joined
Nov 4, 2024
Messages
2
Location
Dutchess Co. NY
Pre-EB MM had a Poly finish around that time which was susceptible to cracking, and more so if the instrument was exposed to extreme changes in temperatures. Do you have some pics?are aft
Thank you for the reply. I do remember one cold night I left it in my car after a job - Dumb ass move!! Will try to get pictures sent.
 
Top Bottom