• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

NorM

Well-known member
Joined
Apr 18, 2003
Messages
4,177
Location
Tucson
These questions came up here and there so I thought what a good thread idea.

First My Graphite Pearl Silhouette
100_2002.jpg


Your guitars are yours to do with as you please. Me, I like EMG's in SiLOs.
The neck is an EMG 85 just like the one in the bridge in the Luke. The middle is an EMG single coil and the bridge is an EMG 89. Let's discuss.

The EMG 89 is an EMG 85 with coil splitting capability. When in split coil mode the coil under the logo is active. I really like the pup selection #2 on the stock SiLO (inside coil in the bridge and the middle single coil) so that's what I wanted to keep.

EMGs can be oriented either way under the strings. Also there is the EMG 89R (Reversed) that has the logo on the other side but that would mean two things. 1. I have the patience to order and wait for it. 2. I would be doing things NorMally and I just don't seem to be physically capable of doing that.

On this guitar the 89 is default to humbucker mode. It is put in single coil mode by pulling out the volume knob. I really like the clean look of that system. Speaking of clean looks; the 5 way was also replaced so the guitar shares the switching system with a y2d. (B, B+M, M, B+N, N) This way I can run both humbuckers at the same time.

Thanks for letting me share.
 

kbaim

Well-known member
Joined
Aug 16, 2003
Messages
4,949
Location
Red Rock Country
I'm gonna replace the 85 with a 89 in at least one of my Lukes.

Thanks for that Norm. Now to find a good proce and a qualified tekkie.
 
Top Bottom