If you were BP...

[balance]

OK, so I'll add a design I worked up a while ago. Didn't have a EBMM Headstock shape to work with, so just pretend it is the 4+2 Headstock.

Swamp Ash Body + Maple Top
Dimarzio Tone Zone T Bridge - Cream
BKP Mississippi Queen Neck in Middle - Chrome
Dimarzio Air Classic or Air Norton Neck - Chrome
5-way
3-way Mini Toggle for Series/Parallel/Split

 

[Headstock]

Rosewood necked 25th hardtail. With a quilted top AND back. ...in Pinkburst or Purple Sunset.

 

[ShaneV]

We should work out an exchange where all you guys wanting rosewood neck JPs alot me your share of maple so I can have maple neck and fretboard JPs. The total wood consumption will balance out that way

 

[luv]

honeyburst Al...rosewood fretboard...mm90's....natural headstock with Jp inlay at 1st fret (because those are my initials).

honeyburst Jp6..natural headstock. Inlays.

 

[Jack FFR1846]

I just had a 25th with a rosewood neck made

The man knows more about guitars than I ever will. I'll go with this.....needs a trem (since not specified). I'm not sure if they have piezos available, but I'd like that. No tone knob....replaced with a piezo volume.

jack

 

[73h Nils]

One more Dargie JP7 with piezo in mahogany...Oh wait, did I just break the rules?

 

[brokenvail]

I would have a Rosewood A.S.S. with Piezo except with HSS config. The bridge pu would be the one that come with the A.S.S and the single coils would be over wound versions of the ones in the SS. Another version of this would be the 25th body with an A.S.S. RW neck and the above mentioned electronics.

 

[Astrofreq]

Black Sparkle Axis HARDTAIL. Chrome pickups, binding and knob. Ebony fretboard. 3-way toggle (of course).

Also, the same in White Sparkle with Gold pickups, knob and binding. Maple fretboard

 

[RobW]

The man knows more about guitars than I ever will. I'll go with this.....needs a trem (since not specified). I'm not sure if they have piezos available, but I'd like that. No tone knob....replaced with a piezo volume.

jack

I'd go along with this idea too, except I want two versions.

First, my guess is BP's a hardtail guy. so I'd go right along with the rw neck hardtail 25th. A piezo system would be super extra bonus. and I'm ok with the tone knob.

Second, a rw neck 25th w/ trem., and although the red is beautiful, the above guitar is already red, so I'd want either trans white or if that wasn't possible, trans black. A natural top would be incredible too with the quality tops on there...Pacific Blue Burst would be sweet as well...

 

[Stratty316]

I would not mind a Trans Blue Axis with a BFR Rosewood neck or even a White Silhouette Special (SSS, trem) with a BFR Rosewood neck. Why is it we always want the model we can't have... I even thought about buying a Rosewood Axis today just so I could swap out the neck with either my Amber or Green Axis. How cool would that look?

Also, Who wouldn't want a BFR Carved top Axis...hmmmm????

 

[Slingy]

Well just to be different, how about an alder or ash bodied ASS with MM90's and a Bigsby? Maybe even an F hole.

 

[bkrumme]

Quilted top & back 25th with BFR rosewood neck, push/pull coil taps, a kill switch, and piezo trem

 

[buckethead777]

Quilted 25th Amethyst blue with F holes, left hand of course

 

[Smellybum]

I just had a 25th with a rosewood neck made

excellent choice, Rose wood brings out the dar reds better - I can't wait to try one.

 

[Progdude]

A Silo with a rose wood neck and birdseye maple fretboard. Slightly Chambered. Alder/Ash/Mahogany body. Machine screw neck . Slightly thicker body (1/2"). 1'4" flame maple top stained in a white burst. Dunlop 6000 frets 2 point bridge with an oversized brass bridge block. Graptech saddles. Schaller locking tuners, Tremol no. Slightly widened bottom cutaway. Strung with RPS 11s. Everything else is stock.

 

[dstockden]

A Silo with a rose wood neck and birdseye maple fretboard. Slightly Chambered. Alder/Ash/Mahogany body. Machine screw neck . Slightly thicker body (1/2"). 1'4" flame maple top stained in a white burst. Dunlop 6000 frets 2 point bridge with an oversized brass bridge block. Graptech saddles. Schaller locking tuners, Tremol no. Slightly widened bottom cutaway. Strung with RPS 11s. Everything else is stock.

you forgot to mention what tuner buttons you wanted!

 

[Lou]

JP in white sparkle with black hardware.

 

[bkrumme]

JP in white sparkle with black hardware.

Finish the neck also and put an ebony fretboard on that and I'd buy it...

 

[Tone?]

Ok here goes.....


SILO SPECIAL
BUT.....

1) With Basswood body and maple cap, Scraped binding.
2) No Pickguard or with pickguard.
3) Could be H/s/s or H/H
4) Silo spec neck
5) EBMM FLoyd or Vintage style.

Simply awesome.

Why cant EBMM Make a Silo Special with different wood combos???
Imagine..

Basswood maple cap
Mahogany maple cap

 

[agt]

I just had a 25th with a rosewood neck made

Awesome! Must be a tone monster!