JP Majesty Pot Nut

[dryst_1025]

anyone has a link for the nut for the potentiometer for the majesty? what size is it? any help will be appreciated!

and is it normal for the piezo volume knob to have a bit of a wiggle when you move it? because the other two knobs feels tight.

 

[LesPaul]

Curious about the wiggle question also because I noticed that on my Majesty

Sent from my SM-G930V using Tapatalk

 

[DrKev]

See here...

http://forums.ernieball.com/ernie-b...-volume-pedal-info-post920311.html#post920311

 

[dryst_1025]

thanks alot!

 

[dryst_1025]

i did try to tighten the pot nut, still the same issue. zzzz

 

[MJM]

funny.. I just checked all 3 knobs on my majesty.. and they all have a bit more "play" in them compared to my other jp's. I believe its because they all have some other function (push) than just turning them. The piezo knob when pushed in and held switches the guitar to stereo and back.. that may be what you are feeling. Thats what I feel with my majesty piezo knob. fwiw

 

[dryst_1025]

funny.. I just checked all 3 knobs on my majesty.. and they all have a bit more "play" in them compared to my other jp's. I believe its because they all have some other function (push) than just turning them. The piezo knob when pushed in and held switches the guitar to stereo and back.. that may be what you are feeling. Thats what I feel with my majesty piezo knob. fwiw

yeah i was thinking that too man, i checked the pot for the piezo knob and it looks like it's not the pot that moves but the shaft itself has a little play to it, where the knob rests. dunno maybe this is how they designed it.

 

[dryst_1025]

does music man btw use a nickel or chrome plated nuts?

 

[JamieCrain]

No movement on mine, other than the push function for stereo/mono switch.

 

[dryst_1025]

so your piezo knob the third one, has a bit of a play to it too?

 

[JamieCrain]

Not "play", it just clicks when you press it. If you click and hold it will switch between mono and stereo output. The vol and tone pots have spring loaded push/push switches for boost and coil-tap, respectively.