👕 Get New Ernie Ball Merch Now!
  • Ernie Ball
  • Music Man
  • Sterling by Music Man
  • Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.
Ernie Ball Music Man Custom Design Experience

JP15 and Shure QLXD16 trouble

J

JP15

New member
Joined
Jul 6, 2020
Messages
2
JP15 and Shure GLXD16 trouble

I got myself a new GLXD16 pedal wireless.

It doesn't works well with my JP15 and MarK V.

On the clean channel I can hear a kind of clipping espescialy when playing low notes. I tried to lower the unit gain at -10 db and it is still there.

My question for you guys, if you use the GLXD16 , how much gain do you have to cut so that it works with that wireless ?

Any tips to make it all fit ?

Dom
 
Last edited:
It has something to do with the type of output jacks mm uses and the preamp for the piezo. Some wireless manufacturers recommend not using the trs type plug that the wireless often use and using a 1/4 inch barrel connector for the wireless and a standard 1/4 inch short patch cable to the guitar. I dont use the piezo on my jp6 so I dont leave a battery in the gtr either. My wireless works fine plugged directly in or the extension cable.
 
Last edited:
You must log in or register to reply here.
Classic Rock N Roll Slinky
Back
Top