👕 Get New Ernie Ball Merch Now!
  • Ernie Ball
  • Music Man
  • Sterling by Music Man
  • Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.
Ernie Ball Music Man Custom Design Experience

L3 setup questions

J

jff

Active member
Joined
Aug 25, 2014
Messages
42
I had my L3 set up with higher gauge strings. I changed back to 9-42s. I have some buzzing, so I know I need to adjust truss rod for more relief and adjust intonation. I'm not sure how to adjust the tremolo. I'm no longer getting the step and 1/2 bend on the g string. How do I make that adjustment? Also, I'd like to know the correct string height at the 12th fret. I have no experience in adjusting a tremolo. Suugestions much appreciated. Thanks
 
Last edited:
Are you getting more or less than a step and a half on the g-string?

If more: Tighten the springs a bit and retune the guitar.
If less: Lessen the springs a bit and retune the guitar.

Repeat either one of those steps, until you reach the desired result.
 
Less than step and 1/2. Thanks. I'll lessen the springs a bit.
 
Hello, I would square away the neck first, then adjust the springs after the neck is just right. String height can be whatever you like. I like my strings very low.
 
You must log in or register to reply here.
Classic Rock N Roll Slinky
Back
Top