• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

beej

Moderator
Joined
Aug 16, 2004
Messages
12,353
Location
Toronto, Canada
I should clarify ... one of the LIIIs came stock with larger stainless frets, but I've had two others refretted with the same material.
 

Rbg

Well-known member
Joined
Jan 31, 2022
Messages
364
Location
USA
So 0.047x0.104? I am considering those vs 0.051x0.100. I also was thinking about 0.057x0.110, but I am afraid those would be too big for miniature Luke necks
 

DrKev

Moderator
Joined
Jul 8, 2006
Messages
7,532
Location
Somewhere between Paris, Dublin, and Buffalo
So 0.047x0.104? I am considering those vs 0.051x0.100. I also was thinking about 0.057x0.110, but I am afraid those would be too big for miniature Luke necks
I've measured frets on two Cutlass necks and they came in around 0.040" x 0.095" and 0.044" x 0.094". Obviously those measurements are +/- 0.001" and the finished fret height will vary a little from guitar-to-guitar because of the fret levelling process).
 
Top Bottom