Majesty tremolo screw

[hsouris]

Hey guys,

I’ve recently got a used Majesty and unfortunately discovered that the hole on the back of the tremolo (when I dive bomb) that is used to tighten/loosen the tremolo arm (sorry, I don‘t know what it‘s called exactly) is not as it should be. I’ve got another Majesty and I can see the difference. It appears that the previous owner somehow damaged the screw I guess. Is there anything I can do?

 

[GWDavis28]

That's a bummer sorry to hear that. Is the set screw still in there?

Glenn |B)

 

[beej]

I can't tell ... but if it's in there and stripped, maybe use a small reverse thread drill bit to get it out? Then replace it. Someone here may know the specs of the screw- otherwise email MM customer service and they can tell you what it is.

 

[DrKev]

For a new screw you want an M3 x 0.5 x 3 mm. Getting the old screw out is the tricky part.

 

[GWDavis28]

For a new screw you want an M3 x 0.5 x 3 mm. Getting the old screw out is the tricky part.

Easyouts might work, just have to be careful not to screw up the existing mounting threads in the block.

Glenn |B)