Help! Misaligned Trem and Whammy Bar Issue

[Marc0612]

I recently noticed the back of my Majesty looks off centered, is this a problem? Doesn't seem quite right to me. I am also not able to put my whammy bar in the whole, doesn't even go 1/4" down into the hole. It used to be fine until recently. Thanks

 

[dave1812]

I don't know about the Alignment, but you should be able to adjust the Tension of the Tremarm with the small Allen Screw, that's located on the Rearside of the Tremblock.

 

[Marc0612]

Cool thanks! I'll see if I can get to it

 

[CHill]

The center spring looks in line with the back of the neck and the springs look perpendicular to the block, so it should be good. As long as there is the right amount of spring tension to float the trem with you string tension then you are good - screw on the cover and rock it.

Read through this post as it covers the whammy bar adjustment:
http://forums.ernieball.com/music-man-guitars/58648-ngd-john-petrucci-tremolo-problem.html

 

[Marc0612]

Thanks Chill,

I tried adjusting those screws for the tremelo bar problem but nothing seemed to work. It still won't go in but I am having the same issue that he was. Hopefully I hear back from customer service soon, still waiting on an email back.

Thanks again for the help!