• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

SteoREMZ

New member
Joined
Nov 13, 2012
Messages
4
Hi all!
i've got a question...is possible that a stingray bass has neck dated befor 1980 and body dated after?
has been done by the manufacturer or from someone who has assembled later ?
in any case...what about the value ?

thanks very much

Stefano
 

Rod Trussbroken

Moderator
Joined
Jul 25, 2002
Messages
5,204
Location
Bris Vegas. AUSTRALIA.
I've seen some original Pre-EB Basses with neck and body dates up to a year or so apart but it's not that common. The more the dates are apart, the more suspicious I'd be that the neck has been been swapped with another Bass
 

SteoREMZ

New member
Joined
Nov 13, 2012
Messages
4
so with 1982 body and 1979 neck the bass is an assembled ones...what about vuale ?
 

Golem

Well-known member
Joined
Aug 30, 2005
Messages
2,278
Location
My Place
`
There's a story, not usually doubted, that
while Fender was supplying necks to the
then-new EBMM bass manufacture, that
Fender intentionally delivered necks of a
somewhat questionable quality. It follows
from that story that one should therefore
encounter early production EBMM basses
with replacement necks just a few years
younger than the bodies.

Value ? I wouldn't concern myself with it.
Collector/vintage value exists in a parallel
universe to player/utility value. In the c/v
universe only a Fender brand bass has a
galactic scale market value, usually $10K
to $20K above its p/u value. True, a MM
can have collector value, but it will be of
a non-galactic scale, usually $1k above
its player/utility value.

Changing just a solder joint [frinstintz as
a necessay functional repair] can take a
nasty bite outa the c/v value of a Fender
[myths being rather fragile entities] and
a nasty bite outa $15K is REAL MONEY.

Since the c/v value of a vintage EBMM is
not of a galactic scale, a major drop in
the c/v value of an EBMM is measured in
3-figgers USD, versus often 5-figgers for
a Fender. Thaz a 100X differential !!!

Bottom line, sweat not the small stuff. A
vintage EBMM is $1500 to $2500, pricing
being so erratic that sometimes the lower
prices are on the more desirable basses.

A new top-of-the-line EBMM bass is about
$2500, coinciding with the higher asking
prices of the vintage EBMMs. So whazzat
mean ? It means any vintage EBMM that
2-or-more players would prefer vs buying
a new top-of-the-line model is a vintage
ax worth AT LEAST $2500. Essentially, if
any vintage EBMM is in reliable condition
and also plays well, it is a bargain when
priced anywhere within the usual pricing
range of $1500 to $2500.

____________________________

Someone is bound to bring up the unique
example of the very first production EBMM
StingRay, well documented, and recently
twice changed hands at the 5-figger level.
Wondrous, prolly worth at least that much
to own that piece of history, but otherwise
completely beside the point here and now.
 
Last edited:

Golem

Well-known member
Joined
Aug 30, 2005
Messages
2,278
Location
My Place
I'd have doubts with a 79 neck on a 82 body

OOoooohh just realized ... makes no sense if it were
a replacement for a faulty neck, cuz the chronology
is all backwards. Yah ! Thaz kinda suspicious, but if
it's a cool ax and assuming you're not running a bass
museum, WTF, life's a one-way trip. It's only money.
 

SteoREMZ

New member
Joined
Nov 13, 2012
Messages
4
thanks for all reply dudes, very appreciate!
my question was relative to a possible buy business, but i don't do that, i was not sure and i don't jump in it!

thanks again very much!!!
 
Top Bottom