Need Help - Steve Morse Floyd Question

[LegGodt]

I'm trying to loosen the bar on my Steve Morse Floyd Rose bridge. I'm not trying to remove it, I just want the bar to swing and not be so tight.

I found what I believe to be an allen screw on the bridge near the bar, but I don't have the right size allen wrench. Can someone please verify I am on the right track before I go buying an allen wrench, or worse before I screw something up on my bridge.

 

[KasperFauerby]

You're on the right track, it's the same as on my Luke 1.
I did the reverse operation recently, my arm was swinging too much

 

[LegGodt]

Thanks Kasper ... Ironically I found the allen wrench for that screw last night. A few years ago I placed the allen wrench for the bar adjustment somewhere where I wouldn't lose it or forget where it was ... but I forgot where it was until I found it last night.

End result the bar is loose and swinging just like I needed it.

Thanks!