• There is a glitch in the forum software and/or configuration that we are still trying to track down. For now, please make sure that the title of your new thread does NOT start with a number (digits). Otherwise, your post will appear to be saved but future attempts to read it will be met with an error message indicating the thread/post cannot be found. ~ admin

oooogie

Active member
Joined
Dec 17, 2017
Messages
40
Location
Tempe AZ
Hey all, I'm having a problem with my EBMM H.H. model. If i lightly touch the strings I get a little pop. When I touch the bridge with one hand and do the same it does not happen.
Any ideas what may be causing this? It also does not do it with a Sterling axis that I have. The Sterling has humbuckers. The H.H. is sss with Piezo. But the problem happens when I'm plugged into either output jack.
 

elvisdog

Active member
Joined
Mar 30, 2019
Messages
37
get you a dryer sheet and wipe down the pick guard & pickups & controls & bridge. I prefer unscented, myself, but whatever floats your boat. If this doesn't solve the problem, then I don't know -- but it sounds like static electricity to me.
 
Top Bottom