nut/hardware lubricants

I have never used it but Stan at the local repair shop here swears by soap on guitar nuts . He has a bar of soap on his work bench an he rubs it on the nut every setup. Who knows if it really works but my setups have always been great.
 
On stud posts for bridges I use Carmex lip balm. Rotate the post slightly, apply lip balm, rotate back into place. Like it in the nut slots also.
 
I use soft pencil, aka pure graphite in the nut.

People combine it with vaseline or use one of the commercial products because the pure pencil is gone pretty quickly. But I don't want black goo everywhere and rather re-pencil every now and then. Also, the effect for the most part lasts even after it blew off.
 
I've used the pencil one before.. not bad... I use Big Bend's Nut Sauce with much success... on the nut and the trem posts for the trem equipped.... anywhere that rubs really.

Yes. I use nut sauce on my balls.
 
Big Bends Nut Sauce user here as well. Works very well for nut and bridge slots. Have also used it to lubricate trem posts. A tube lasts forever.
 
You know what I used yesterday to lube my nut and knife edges,... Mineral oil, the little bottle that comes with hair clippers, is pure food grade mineral oil, and it worked great!
 
Just be careful with liquid oils - use only the absolute minimum necessary and wipe up all excess. Try to avoid liquids seeping into woods and finish.

Personally, I've switched to white lithium grease (I got a 40g tube on amazon from a bicycle repair store) applied with a toothpick or the edge of business card. All the advantages of mineral oils with none of the mess. There is chapstick in my gig bag for gig emergencies.
 
Dr. Ducks Axe Wax. I twist a cotton swab into a point then add a drop of the oil. Now just dab it in the nut slots and presto. I do the same for my saddles and my guitar stays in tune great.
 
Back
Top