original EVH signature owners can you help?

[howling wolf]

I recently bought a first year EVH on Ebay and wanted to see if your EVH has the same pup height as mine?
mesuring from the top of the slug coils pole to the bottom of the low E and high E
mine is,

Bridge pup
low E= 5/32"
high E= 4/32"

neck pup
low E 7/32
high E 6/32"

and IF you also own a wolfgang what are those pup heights?

 

[howling wolf]

what every one is either to lazy to measure or they are just mean

 

[dwf1004]

...or there are people at work for another couple of hours, while their babies sit at home under a protective sheet?

Jon, one of the techs there at EBMM, frequents this board and may be able to help ya out soon. If not, hang in there, man...someone here will get ya an answer!

 

[jongitarz]

I dont have an EVH to measure, but since the p.ups are not adjustable, if they are the factory p/ups, and are screwed all the way down, it should be the proper height...EVH owners??

 

[howling wolf]

I dont have an EVH to measure, but since the p.ups are not adjustable, if they are the factory p/ups, and are screwed all the way down, it should be the proper height...EVH owners??

thats what i originally thought too,but i heard some are higher or lower in height

 

[howling wolf]

...or there are people at work for another couple of hours, while their babies sit at home under a protective sheet?

Jon, one of the techs there at EBMM, frequents this board and may be able to help ya out soon. If not, hang in there, man...someone here will get ya an answer!

 

[dwf1004]

HW:

'Twas a busy day yesterday, between runnin' my gal to the hospital to visit a friend, a vocal lesson, and meeting with the folks in a project that I'm putting together.

I just measured both of my pieces of wood (heh heh), and both of them match your measurements, with probably microscopic difference in measurement.

Both of mine sound great, so I'd venture that you'd be fine.

Sorry for the late response...that was on my list to do after I posted yesterday, but obviously couldn't get to it due to my already packed schedule. Give me a little credit, at least, for the follow through.

 

[howling wolf]

HW:

'Twas a busy day yesterday, between runnin' my gal to the hospital to visit a friend, a vocal lesson, and meeting with the folks in a project that I'm putting together.

I just measured both of my pieces of wood (heh heh), and both of them match your measurements, with probably microscopic difference in measurement.

Both of mine sound great, so I'd venture that you'd be fine.

Sorry for the late response...that was on my list to do after I posted yesterday, but obviously couldn't get to it due to my already packed schedule. Give me a little credit, at least, for the follow through.

thanks i looked under the pups and there is no sign of further routing, i have heard some shim to raise the pups though? i like em where day at