OT: for Svt4-PRO users

[johans]

guys..

those of you that had used or is still using 4pro, just wondering what's your amp config? dual mono? stereo? biamp hi low? biamp fullrange low? mono-bridge?

when you are using 2 cabs for instance ..


mind to share why you choose those?
i am normally using a mono-bridged to my 410, then relay a cable from 410 to 115
but i am curious on trying the biamp hi low

thanks

 

[skabassist13]

the 4pro has a hi-low bi-amp system? i thought it was just left and right? 2 power amps at 600 watts apiece, or one at 1300 watts. right?

 

[maddog]

the 4pro has a hi-low bi-amp system? i thought it was just left and right? 2 power amps at 600 watts apiece, or one at 1300 watts. right?

don't own one nor have I ever used one but http://www.ampeg.com/ lists an "Internal 24 dB/Octave Crossover" and "1/4' Biamp High and Low Outputs" in the features for the SVT-4PRO. So I would expect that it can biamp a hi/lo setup.

 

[skabassist13]

it appears that it does then. i didnt know that. i wasnt saying that it didnt. i just thought that it had two power amps that could be bridged for more power. apparently its more versatile than i thought it was.

 

[johans]

YEAP

its ultra versatile