DoobZilla
Member
- Joined
- Apr 9, 2008
- Messages
- 19
Okay, I bought my JP6 BFR last year, had to send it in for a new neck (absolutely perfect customer service BTW!). And now, a year or so later, it seems that my bridge pup isn't responding as well as it should (i.e. low volume, flat tone, slight crackle as though gain is ultra high and the problem seemed to happen very quickly). I am planning on calling customer service on Monday, but since they are off today and the weekend (deservedly so) I was curious if my fellow knuckleheads could lend a helping hand. In all of my years of playing various makes and models, I have never come across such a problem. It only effects the bridge pup, when I switch to the neck it seems fine, almost too fine (hard to describe but yeah). Also, the piezo sounds great too.
I'm almost thinking that perhaps a wire could be shorting internally? Or perhaps a pot has gone bad? (on this note, I do not notice any ill effects on the neck pup at all i.e. crackling when turning knobs actuating switches etc.) When I run out of the non-piezo output I have the same problem, thus eliminating the piezo (perhaps?).
Since I'm no equipment guru, perhaps someone else has run into this problem before and knows exactly what is going on? I don't want to start muxing around in the guts of this beast yet as I'm sure that I'll just fubar the whole lot without a wiring schematic. I'm sure that it is nothing major as I haven't even gigged with this monster yet (too many conflicting schedules!) and have only been practicing about eight hours a week (extremely inconsistent at that) with it.
Thanks for any and all help, and if more info/pics/sound clips are needed, just let me know.
I'm almost thinking that perhaps a wire could be shorting internally? Or perhaps a pot has gone bad? (on this note, I do not notice any ill effects on the neck pup at all i.e. crackling when turning knobs actuating switches etc.) When I run out of the non-piezo output I have the same problem, thus eliminating the piezo (perhaps?).
Since I'm no equipment guru, perhaps someone else has run into this problem before and knows exactly what is going on? I don't want to start muxing around in the guts of this beast yet as I'm sure that I'll just fubar the whole lot without a wiring schematic. I'm sure that it is nothing major as I haven't even gigged with this monster yet (too many conflicting schedules!) and have only been practicing about eight hours a week (extremely inconsistent at that) with it.
Thanks for any and all help, and if more info/pics/sound clips are needed, just let me know.