• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

Hanni

New member
Joined
Jul 17, 2011
Messages
1
pls How I can get an new "output Jack" for 2 Band preamp SUB4, or the whole preamp

Hi (low),

what I can do,if my preamp makes problems: Vol cann´t quiet, and the output jack
makes "earthquaking".

I`ve look inside an see, the output jack (inside) not more in form, so is an optimized
contact impossible, i would rebuilding (change) only the jack or the whole 2 band preamp.

What I must do, or how I can get replacement parts????

Pls aswer quickly.....
kindly regards
h.
 

JayDawg

Well-known member
Joined
Feb 21, 2010
Messages
1,880
Location
Sterling, Colorado
Where are you from? Contact the store that sold you your bass and speak with them about the problem. Also, is your bass still under warranty?
 

stingray96191

Well-known member
Joined
Jul 3, 2002
Messages
771
Location
Pittsburgh, PA
if the jack is the problem.. its a $5 part and hour of service work to have it installed. If its bigger than that you still need to take it to an authorized repair shop to get it fixed. Either way you're better off calling cust care, or taking it to someone that knows how to properly troubleshoot these things.
 

MrMusashi

Well-known member
Joined
Mar 26, 2007
Messages
2,840
Location
69 degrees north
if there are no local dealers there are plenty of distributors located all over the world :)

let us know which country you are from and we will help you find the distributor.. then you can call them and ask them who to use for the repair.
its much easier to talk in your own language about technical stuff :)

hth!

MrM
 
Top Bottom