PRS 57/08 in Cutlass HSS

[unclewally87]

I have the wiring diagram for the cutlass hss but it shows only 2 leads coming from the stock humbucker that they use. I have a PRS 57/08 that I’m putting in the bridge. Is anyone able to shed some light on how I would wire up that particular pick up? It has 3 leads, white, black, and red, as well as a braided shielding. Any help is greatly appreciated!

 

[beej]

Google is your friend here - you have to look at the PRS wiring diagrams

Looks like black is ground (wire it to ground along with the shield) and white is hot (wire it to the lever switch). Red is used if you're coil splitting. If not, cover the end of that wire (tape or heat shrink) and leave it alone.