Hello guys I have a ebmm JP12 7 string that came with Bare Knuckle pickups professionally installed by the previous owner. He also gave me the original Dimarzios CL/LF that I want to install on this guitar.
The problem is that there are so many wiring diagrams on the internet that I just don't know which one to use, even in Dimarzio web site the schematics are poor illustrated.
It's a 3 way toggle switch with a push pull on the tone to get the inner coils in parallel.
It's going to be my first attempt at installing pickups, I have good experience with soldering small electronic components though. If you guys could help me out with the correct wiring for the default JP12 setup or any other material It would be extremely helpful.
Thanks
The problem is that there are so many wiring diagrams on the internet that I just don't know which one to use, even in Dimarzio web site the schematics are poor illustrated.
It's a 3 way toggle switch with a push pull on the tone to get the inner coils in parallel.
It's going to be my first attempt at installing pickups, I have good experience with soldering small electronic components though. If you guys could help me out with the correct wiring for the default JP12 setup or any other material It would be extremely helpful.
Thanks
