ZeroFivefour
Well-known member
I want to swap my current 2004 axis volume pot with one from a luke 3. (non push pull). see below:
shop.music-man.com
I replaced my axis volume knob with one from a luke 1, from day one of owning the guitar in 2004. I just prefer it. It doesnt really center properly on the split shaft of the axis without a bit of inginutity however.
Currently, the volume pot is old, and is very difficult to turn.
I thought about using some de ox, but figured, for the 8-10 bucks, I'd just replace it with the solid shaft. Solve 2 issues with one swap.
Any issues with this anyone can mention before I go for it?
Thanks in advance.
054
500k Solid Shaft Potentiometer
500k volume or tone solid shaft potentiometer (for knobs with set screws) for the following Ernie Ball Music Man guitars: John Petrucci, Reflex, Albert Lee (with metal knobs), Axis models (with metal knobs), Armada. Also used as tone control for Luke 3 models made prior to 2020 (with the...
shop.music-man.com
I replaced my axis volume knob with one from a luke 1, from day one of owning the guitar in 2004. I just prefer it. It doesnt really center properly on the split shaft of the axis without a bit of inginutity however.
Currently, the volume pot is old, and is very difficult to turn.
I thought about using some de ox, but figured, for the 8-10 bucks, I'd just replace it with the solid shaft. Solve 2 issues with one swap.
Any issues with this anyone can mention before I go for it?
Thanks in advance.
054
