mbgreene
Well-known member
It be this
- Thread starter joe web
- Start date
brentrocks
Well-known member
Norrin Radd
Well-known member
Brent - you're killing me. Every time I see a pic of your play area, I get EVH envy, and that striped EVH only magnifies it exponentially. 
I was dreaming today of an AL (striped like your EVH), with Axis pickups, a maple cap and the JP trem. See what you are doing to me? Have you no sympathy for others?!?!
I was dreaming today of an AL (striped like your EVH), with Axis pickups, a maple cap and the JP trem. See what you are doing to me? Have you no sympathy for others?!?!
tommyindelaware
Well-known member
Guytron. Best sounding amp I've played through. 2 channels of total bliss.
+3 on the guytron !!!!!
i'm bringin 1 to texas to show off.
candid_x
Well-known member
- Joined
- Jun 26, 2006
- Messages
- 3,272
Rob,
You might consider just replacing 1x12 with the Wizard and leaving one stock speaker in place. While this speaker is considerably louder than others, it does blend very well with others too. For some reason, 2 Wizards side by side doesn't sound as good as one, but when mixed with another speaker voicing, it's freaking unreal.
Should go without saying, but make sure you get the correct impedance. Remember also that they take a good few hours of playing to break in and warm up.
If you get one let me know how it works out for you.
You might consider just replacing 1x12 with the Wizard and leaving one stock speaker in place. While this speaker is considerably louder than others, it does blend very well with others too. For some reason, 2 Wizards side by side doesn't sound as good as one, but when mixed with another speaker voicing, it's freaking unreal.
Should go without saying, but make sure you get the correct impedance. Remember also that they take a good few hours of playing to break in and warm up.
If you get one let me know how it works out for you.
Warg Master
Well-known member
This has changed since my original post here.
Last edited:
Dizzy
Well-known member
Definately !
I just do plenty of reading around online to see what the goss' is and narrow my choices down before I'll venture out and try them.
Even though everyone has there own tastes, it soon becomes pretty apparent when something is good or a lemon.
Has saved me plenty of time in the past !
dickie
Member
Ok, here it comes:
This is my "control" centre with build in talkbox and mic. stand:
Used the set like this for over a year now; doing some updating - mxr dynacomp and z-vex probe wah are comming in...
This is my "control" centre with build in talkbox and mic. stand:
Used the set like this for over a year now; doing some updating - mxr dynacomp and z-vex probe wah are comming in...
threeminutesboy
Well-known member
waaaaaaaaaaouuuu
joe web
Well-known member
@dickie:
do you have a close-up of your control-centre?
do you have a close-up of your control-centre?
dickie
Member
Here are some pics:
You guys (and girls?) might have heared of Paul Lenders "PL Guitarsystems" - Well, he's a friend of mine and I often work with him. My setup is a combination of my dreams, our ideas and know-how combined in a mix of being creative and make it road proof! ...it's the best dream come real!
joe web
Well-known member
i like this floorboard!
is it right, that you only have 4 direct preset buttons and the rest is for adding different single effects.
is it right, that you only have 4 direct preset buttons and the rest is for adding different single effects.
threeminutesboy
Well-known member
brentrocks
Well-known member
Brent - you're killing me. Every time I see a pic of your play area, I get EVH envy, and that striped EVH only magnifies it exponentially.
I was dreaming today of an AL (striped like your EVH), with Axis pickups, a maple cap and the JP trem. See what you are doing to me? Have you no sympathy for others?!?!
Sorry dude, i didnt realize it had that effect on you?
dickie
Member
ditto Like this setup dude
anychance we can hear it
Yes, 4 presets and the rest is for CC's - some are fx in G-Force, some are fx-pedals in looper and 3 functions for loop-sampling in Line6 Echo Pro.
For sounds; I don't have resent recording, but there are some samples of my band on our site: www.force10.nl check out under "muziek"
slukather
Well-known member
Man dickie,
Thats a nice setup you have there, makes me hanging for my CAA preamp, ETA next monday.
What model is yours? any mods done to it?
Scott.
Thats a nice setup you have there, makes me hanging for my CAA preamp, ETA next monday.
What model is yours? any mods done to it?
Scott.
dickie
Member
It's a 3+SE - has no mods - is good enough for me as it is!
TwAn
Well-known member
My main amp: (Fender Deville 410)
Together with a Marshall JTM410 extension cab:
And a spare Marshall Valvestate 100W:
And this little rocker:
Together with a Marshall JTM410 extension cab:
And a spare Marshall Valvestate 100W:
And this little rocker:
