specs on neck thickness for JP model

[archtop]

I am thinking about purchasing an EBMM JP model 6 string and 7 string guitar. I have not been able to find the neck thickness of these guitars on the MM website. I am looking for the thicknes at the 1st and 12th fret for both instruments. Any help would be greatly appreciated, thank you.

 

[dwf1004]

Archtop:

According to the link listed below, EBMM has the neck radius listed as 15". I would assume that this is for the whole neck, but that's for Greg to confirm or deny.

The link that you want for all specs of EBMM guitars is:

http://www.ernieball.com/mmonline/specs/

Hope this helps!

Darrell

 

[archtop]

RE: neck specks

Darrell,

Thanks for the reply, I am actually looking for the neck thickness from fingerboard to back of neck, not the radius, but thanks anyway.


Archtop

 

[Greg]

No specs available on front to back thickness.

Thanks,
Greg

 

[Zakkselvagem]

I have a 2009 JP6 and my friend has the exct same guitar , but is 2012 and the neck on his JP6 is thicker than mine clearly...!!