Squeezed O.j.??

[shredderbetter]

I just got the orange trans axis(new),shipped with a broken 3 way switch(c.s. will take care of me I KNOW that)I was just wondering does it come pre soldered or not??the actual switch must have gotten damaged.like 1/4" play in and out on the pole?Do I need to solder on the volume pots or the dreaded pc board??If anyone knows give me a yell!!STILL looking for the smy2d QUILT purple sunset W/floyd anyone have holiday bills & need to sell one give me a shout!Also anyone need a new hardshell case(came with axis) I'm always looking to help our forum buddys!
JG

 

[beej]

Great looking Axis man!

The switch is pretty generic, you'll have to solder the wires off the old one and then onto this switch. But it's pretty easy. You'll have a wire from each pickup and one going to the volume control.

Just make sure not to overhead the wires when you're soldering (don't hold the iron there forever). Don't want to pass too much heat onto the pickups.

 

[NorM]

That is one GREAT lookin' Axis.
Having confidence that CS will make this right
Priceless

Hopefully your big worry is going to be finding enough time to play.

 

[Larry]

Nice Axis! I guarantee CS will take care of you Monday

 

[shredderbetter]

I had work buy me a KILLER weller pro solder station for $300 I told them i needed it for work??I'm a locksmith for a living but EVERYTHING is moving to electronics so they bought it! I'm pretty handy at soldering just hard to get to those pots easily but I'll manage,i just changed out a volume on one axis to a push/pull for coil tapping,very cool single coil tones ,now i gotta' change out my other 12 axii?(is that a plural ?)

jg

 

[Tim O'Sullivan]

The original EVH had a small PCB under the switch, but every one that I have swapped out came without the PCB, and you soldered onto the switch itself.

 

[shredderbetter]

all 13 of my axii have the 3 way switch on a pcb?Not sure they changed for a while?It looks pretty simplistic I managed to change pickups in all my pet's and they use a pc board with a 16th inch little solder point those are tricky but i'll hopefully manage!still not sure how that got damaged when the trem arm was on?thet usually takes the hit!

 

[Eilif]

The three-way switch on my SUB1 also had a PCB on it.

 

[Tim O'Sullivan]

Maybe I did not express myself properly. All of the replacement 3 ways did not have a PCB. The ones originally installed did.

 

[Larry]

Way back when I had my Cherry Burst Axis I broke the switch, CS shipped me one with PCB.

 

[shredderbetter]

this will be my 3rd.time dealing with cs,always nice hey Larry once the dargie sells are you changing the avatar??I just sucks getting a new guitar and not having the ability to play it!







my toys!

shredderbetter - Photobucket - Video and Image Hosting

 

[Larry]

Eventually it will be updated with a picture of my Blue Dawn Axis... You got PM regarding the SKB EBMM Hardshell Case

 

[fogman]

nice Axis!
More pics please!!!

 

[PeteDuBaldo]

Sharp lookin Axis!

I just got one of those Weller soldering stations for the store after seeing the one Tommy uses; they are fantastic!

 

[shredderbetter]

I still burn myself like a bad $5 iron but the heat control is much nicer digital adjustment and more power to get off other peoples solder MOUNDS when they attemp a install!I only had old pic took some this morning!