- Thread starter marco_aor
- Start date
PeteDuBaldo
Well-known member
The humbucker coils are generally wired in series as a complete humbucker.
On the LK100D with original DiMarzio pickups, the red wire should be connected to the toggle, the black and white wires soldered together (for series operation, and soldered to a separate wiper side of the switch) and the green and bare wires should be soldered to ground.
On the LK100D with original DiMarzio pickups, the red wire should be connected to the toggle, the black and white wires soldered together (for series operation, and soldered to a separate wiper side of the switch) and the green and bare wires should be soldered to ground.
