-
Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.
sterling lk100 HZB
- Thread starter marco_aor
- Start date
PeteDuBaldo
Well-known member
The humbucker coils are generally wired in series as a complete humbucker.
On the LK100D with original DiMarzio pickups, the red wire should be connected to the toggle, the black and white wires soldered together (for series operation, and soldered to a separate wiper side of the switch) and the green and bare wires should be soldered to ground.
On the LK100D with original DiMarzio pickups, the red wire should be connected to the toggle, the black and white wires soldered together (for series operation, and soldered to a separate wiper side of the switch) and the green and bare wires should be soldered to ground.
