Help! Sterling Music Man jp 60 guitar saddle measuring

[Strider]

Hi everyone

This is my first post in the EB forums, i hope for some help here... ok this is the point.

i'm want to install a new saddle kit for my jp 60, to be more specific a set of graph-tech ghost saddles. But i have a problem graph-tech offers different kind of saddles and sizes and i don't know which kind saddle buy.

someone have the measures of the JP 60 saddles?

or tell me how to take the measures to the saddles ?

i've tried to contact Patpark of customer service. but not answered my email

thanks for watching

best regards

Strider

 

[Spudmurphy]

Hi

Get yourself a set of digital Vernier calipers like these and measure the width of them

 

[Strider]

Hi

Get yourself a set of digital Vernier calipers like these and measure the width of them

HI Spudmurphy

thanks for your help , i'll take a look of the Digital Vernier caliper!

 

[patpark]

JP50, JP60 and JP100 saddle dimensions:

20.26 mm long
10.68 mm wide
5.14 mm height

Hope the info helps.

 

[Strider]

Thanks Pat, you save me a lot of time!

 

[Rockguy66]

Hi Pat,

I am looking for the same thing. However, the saddle sizes offered are measure by string to string, i.e. E to E measures 2.076 " (52.73mm), 2.179" (55.35mm). When I do the math (10.68mm converts to .42047244" * 5 to get center to center of E to E) I get 2.1024". Based on that, I should be getting the 10.41 mm wide saddles, as their string to string is 52.73mm or 2.179" , wouldn't you say? I would rather be a smidgeon smaller than larger, and there is no Graphtech exact replacement in these Ghost Saddles. I am ready to pull the trigger on 3 sets to try and upgrade my JP-100 and JP-60. While we are at it, what are the saddle sizes on the JP-70, are they the same or slightly smaller?

Thanks,

Rockguy66 "Barrett Hamilton"