• Ernie Ball
  • MusicMan
  • Sterling by MusicMan
Joined
Jun 30, 2005
Messages
9
Location
midwest
Hi guys,

I was with a friend today and he pointed out something about his two stingrays.
Both are four stringers with matching headstocks. One bass is 3 years old and the other is one. The newer one has a bigger case and a different shape neck.

I have noticed a difference in case size between my two SR5's.
One is two years old and the other is 6 months old.

Sorry if this is redundant but I did not find info in the search function.

Thanks in advance.


Cecil
 

dhuffguitars

Well-known member
Joined
Jul 2, 2004
Messages
163
Location
Spokane Wa
Computer Numeric Control if I remember correctly. CNC is programming a automated router to shape the neck, body, whatever.

There is still a lot of final hand work done at the EB factory to make sure everything is correct. But the CNC routers make the inital roughing out of the body and necks much faster and more accurate.
 

enjoneer

Well-known member
Joined
Aug 4, 2005
Messages
92
Location
San Luis Obispo, CA
As Moocher stated, the cases were made longer so that the Bongo 5's could fit in them(it's a long one). We use the same case for the StingRay, StingRay5, Bongo4 and Bongo5. The Sterling has it's own case.

As for the neck shape thing. How do you mean the neck is different? We have been using computer controlled routers(CNC) to carve necks since the early nineties. If the oldest bass is only three years old there should be no appreciable difference other than normal manufacturing tolerances, unless it was modified outside of the factory.
 
Joined
Jun 30, 2005
Messages
9
Location
midwest
Thanks guys for all the info.

The action was set the same on both.
The neck on the 3 year old bass seemed to be more round and a bit thicker.
I understand that basses all feel different...
but this was very hard to put my finger on.

Thanks again for all your info.

It is easy to get wrapped up in tactile sensation.


Cecil
 
Top Bottom