• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

Jim Jim Jeree

Member
Joined
May 22, 2025
Messages
17
Location
Memphis
I'm finally done! I'll provide a short summary, followed by a more details about what I learned along the way.

Modifications:
What Went Well:
  • Parallel switching gives me access to a sound with more clarity for rhythm playing
  • I found my ideal treble bleed configuration (JS/*Berg 150k/680pf)
Considerations If You Ever Try This:
  • You have to remove the PCB, as Music Man confirmed that it wasn't designed to be adaptable for this type of switching
  • My tech mentioned that the push/push potentiometers were made for a PCB, so he had to do some extra work to keep the solder points clean
  • The volume and tone knobs sit higher on the pot shafts, resulting in a minor wobble if you actively try to push them side to side
  • You may want to consider quality push/pull pots
All in all, I'm really happy how things turned out!



The Stingray II is my perfect ergonomic and aesthetic guitar. I love the body shape, the neck profile, the tuning stability, and the way it looks. I had a Stingray short scale bass at one point, and I loved the look of it. Needless to say, I was stoked when they finally released a guitar version.

The guitar sounds great, but there were a few things that didn't suit my tastes. The stock treble bleed configuration isn't to my liking. The sound gets a little anemic past about 7 on the volume knob. I personally like to have a broader range of control. It also made it harder to clean up the sound from the guitar for rhythm playing while keeping the clarity up. I have no doubt that this could be done with pedals and amp adjustments. I just like using my volume knob.

Because the ergonomics and aesthetics are so right for me, it's the guitar I always grab from my rack for songwriting. I wanted to make the guitar more versatile so that I could do more with it. So that put me on the journey to do the modifications above.

The Mythos variable treble bleed and selectable tone cap worked out great. I knew the sound I wanted, but I had no idea which treble bleed configuration I wanted to use. Huge shout out to @DrKev and his treble bleed mod roundup article. I was going back and forth between Cap only and the TV 150k/1000pf settings, but I wasn't happy with the trade offs for either. At the end of his article he called out that he liked 150k/560pf for his Silo. The Mythos kit had a JS/*Berg 150k/680pf that was close, and it was perfect! It has a wider range than Cap only, but also a smoother volume taper than the TV 150k/1000pf. For the tone knob, I landed on the same stock tone cap configuration of .022uf.

Will I ever touch these settings again? Who knows, but they let me find what I liked with convenience, so they were worth it to me!
 

Jim Jim Jeree

Member
Joined
May 22, 2025
Messages
17
Location
Memphis
I replaced the Series / Parallel wiring with Partial Split Wiring using 2.2k resistors to ground (how PRS does it). Learned that parallel wiring isn’t the greatest on low output pickups, at least with this set. The neck pickup in parallel was anemic.

Things sound much better now with the partial splits. It’s a much more usable tone for rhythm playing.
 
Top Bottom