• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

tvanveen

Well-known member
Joined
Aug 25, 2003
Messages
666
Location
DC
My AL with vintage trem came with the trem set so that it rested on the body. IOW, you could only divebomb, you couldn't pull up.

Is this they way they're shipped? Are they supposed to be this way?

Last night I set it up to float. I'm using 9's, and couldn't really decide on 1 or 2 springs...I ended up with 2, so now it floats about a 1/4 inch above the body. Does that sound right?

Seems to work pretty well so far.

tv
 

Estin

Well-known member
Joined
Sep 12, 2002
Messages
380
EB doesn't produce floating bridges of any kind that i know off. all the floyd rose equiped guitars EB makes lower pitch only and rest on the body as well. also i've never heard of a vintage style tremelo being able to raise pitch. even on strats and everything they've always rested on the body. it gives them much better resonance and easier string change. my guess is having the AL's bridge floating this way gives you a weird playing angle on the bridge doesn't it? dropping it down to rest on the body i beleive is the proper setup.
 

Squawk

Active member
Joined
Jan 10, 2004
Messages
26
I own 3 guitars with trems - both my 2000 Am Series Strat and '62 AV Jaguar RI have trems that pull up. My EBMM Sil Special does not. Then again, it stays in tune much better than the other two. In fact, pulling up either the Strat or Jag is asking to pull it out of tune - you can go a set reasonably well if you only trem down. And the Sil does dive bomb more than the Strat. The Jag's trem latitude is narrow by design (but boy, does it do surf music the best).

My daughter has an ESP with a Floyd which swings up and down and stays in tune very well.
 

tvanveen

Well-known member
Joined
Aug 25, 2003
Messages
666
Location
DC
Well, I wasn't really sure which way was correct. It's floating now and seems to stay in tune ok...after I reset the action it sounds pretty much the same. Feels a little different, but not bad.

Then again, I haven't really had time to thoroughly test it...
 

JDouglee

Well-known member
Joined
Jan 29, 2003
Messages
423
Location
Sunset Beach CA
Estin said:
EB doesn't produce floating bridges of any kind that i know of.

dropping it down to rest on the body i beleive is the proper setup.
The LUKE actually comes from the factory floating. Same vintage bridge. It just tilts forward. Works like a charm.
 

jongitarz

Well-known member
Joined
Sep 15, 2003
Messages
6,049
Location
Here
The Luke and Petrucci models are the only ones with floating bridges.

Jon
 

tvanveen

Well-known member
Joined
Aug 25, 2003
Messages
666
Location
DC
Thanks.

Can someone explain the physical differences between the floating and non-floating bridges? They look the same to me.
 

jongitarz

Well-known member
Joined
Sep 15, 2003
Messages
6,049
Location
Here
They are the same...On the Luke its all in the setup..the bridge is at an angle not flat so you can pull up or divebomb. On the Petrucci the trem cavity is routed out so when at rest, the bridge is flat, but because of the way the cavity is, the is movement in both directions..I hope this makes sense.
Jon
 

Estin

Well-known member
Joined
Sep 12, 2002
Messages
380
thanks for clearing that up guys, i wasn't aware of any floating bridges availible by EB.
 

tvanveen

Well-known member
Joined
Aug 25, 2003
Messages
666
Location
DC
You're helping, but I'm not quite there yet...:)

Is there anything about the Axis SS or AL trems that prevent them from floating?

Am I asking for some sort of trouble in setting up my AL trem to float? It seems to work....
 

jongitarz

Well-known member
Joined
Sep 15, 2003
Messages
6,049
Location
Here
They can both be setup like the Luke..2 springs, bridge tilted forward. We set the Luke up so when you pull back on the arm it goes up a step and a half.

Jon
 

jongitarz

Well-known member
Joined
Sep 15, 2003
Messages
6,049
Location
Here
If you go to the F.A.Q section of our website there is some info on setting up a Luke. You can use it for the AL or SS
Jon
 
Top Bottom