Three way Petrucci switch???

[Sapphireskiss]

I heard Dimarzio makes the same type of switch, does anyone know the model # or if I can get one through EB?


-Robert

 

[beej]

To do the neck 'bucker / single coil from both 'buckers / bridge 'bucker switching you'll need a 4 pole 3 way switch (12 lugs in total).

I don't know what EB uses, but there are a couple of brands that will do the trick. Dimarzio does have one- it's part # EP1111.
Dimarzio Hardware (pdf)

 

[ernie1966]

I had to replace thw switch on one of my Pet's, I bought the switch from EB, call customer service and they'll hook you up.

Be warned, that switch is a pain to replace, alot of soldering, take it to a pro if you don't have the experience.

 

[Sapphireskiss]

so this one should do the job?

 

[ernie1966]

Here's what the bottom of the Pet switch looks like:

 

[beej]

Yeah, one thing I forgot about that Dimarzio switch is that the lever is pretty small.

So to match what you've got on the Pet I'd do what Ernie did: call customer service and order one from EB.

You might be able to find one from the original manufacturer (whoever that is), but this way you're assured of getting a switch that looks identical. (Also note- there are several different varieties of 4P3T on/on/on switches and the wiring is in fact different for some of them.)

 

[Sapphireskiss]

just ordered from EB. Thanks for the input guys, I did'nt realize EB would sell those. So now I'm only days away from my ESP project completion


-Robert