• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

beej

Moderator
Joined
Aug 16, 2004
Messages
12,328
Location
Toronto, Canada
Will work just fine. The treble bleed mod is a capacitor/resistor to prevent highs from being bled to ground so you don't lose your highs as you turn down the volume. Totally independant of the silent circuit, pickup type, etc.
 

THE_EB_KID

Well-known member
Joined
Oct 15, 2006
Messages
408
Location
New Orleans, La.
Thanks!!thats The One I've Done In My Custom Shop Strat,
And It Works Fine, I Wasn't Sure About The Silent Circuit.
Thanks
 

beej

Moderator
Joined
Aug 16, 2004
Messages
12,328
Location
Toronto, Canada
Can you explain to us electronics buffoons what such a mod is/entails?

Fo sho' Spud.

Take a resistor and capacitor in parallel (both ends connect together) and then run them across the lugs of the volume pot that aren't grounded (e.g. the input and middle lug).

People use different values. Tommy's own Acme suggests a 680pf capacitor (that's "picofarads") and a 220k resistor. I believe Bill Lawrence suggests the same and I've heard good things.
 

yesandno

Well-known member
Joined
Oct 20, 2003
Messages
104
I replaced the pups in both my tele and strat with Bill Lawrence pups (the real BL) and I messed around with a few different values of cap and resistor till I kinda liked what I heard. But that could've been a bit of psychological thing happening too.
I'm no expert but the theory is that the capacitor keeps the high end when turning down the volume and the resisitor changes the value of the pot that the pickup "sees". So, for example, (and maybe not math corrrect) a 150k resistor on a your standard humbucker 500meg pot will make the pickup see it as, say, 300meg.
In this way, some pickups might sound better at that value. Maybe less shrill and less icepicky.
 
Top Bottom