👕 Get New Ernie Ball Merch Now!
  • Ernie Ball
  • Music Man
  • Sterling by Music Man
  • Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.
Majesty Premium Select

What amp/efx/gear do you guys use?

I use my EBMM SM atraight to my Mesa Subway Rocket or Straight into a Digitech GNX3000(with the MFX Supermodels) which goes into a vox ADVT15 or the effects return of the Mesa. Sometimes I use the Vox alone.
 
I am using the following setup:

billys_rig.jpg
 
I run my JP through a rack setup which contains:

Furman Power Conditioner
Rocktron ProGap Preamp v.2.0
Rocktron Intellifex
Rocktron Velocity 250 Power Amp
EarCandy Buzzbomb Stereo 2x12 Cab
 
GTR > Fatsoflex > Strobostomp > Teese RMC3 > Koch GPA Deluxe > Fatsoflex > Koch Powertone II 2x12" combo + Koch TS212 ext.cab (in FX-loop: Boss VF-1).
 
Mesa Dual Recto > Dr. Z 2x12 Loop: Sib Echodrive
Caa Od100 Sh/se > Caa 2x12 Loop: Diamond Memory Lane

Teese Rmc3
Ibanez Ts808 Ri
Klon Centaur
Tim
Lovepedal Eternity
Lovepedal Custom Twin60+cot50
Sib Varidrive
Clark Gainster
Xotic Bb Preamp
Zvex Sho
Mesa V-twin
 
DaveB said:
EBMM guitar (various) into

Keeley TS9 and/or Dunlop ZW overdrive, Klon Centaur -> Custom Audio Amplifiers OD100 into a 2 * 12. Then have the FX loop going to a TC G Major driven by a Crate PowerBlock into 2 1*12s.

But at home I go EBMM->Bixonic Expandora->Roland MicroCube

That Roland is the best sounding "home" amp ever - ask Keith!

Dave
Click to expand...

Those little Rolands are sweet! I was thinking of getting one of the Cube 30's for the practice room. Think it would hang with a drummer? :D
 
these are my kids and babyies!!

HPIM1664.jpg

HPIM1663.jpg

HPIM1657.jpg

HPIM1655.jpg



all the wiring is under the suffece ...
and fs-6 switch pedal is connected both to the delay and phaser pedals to contorl the tap tempo of these babys!!!
enjoy ( i know i will hahahaha)
 
EBMM EVH > BBE Sonic Maximizer > Boss VF 1 processor (in the mail) > Crybaby Wha > Boss TU 2 tuner > 5150 Combo

i'm excited about the VF 1...i hope is sounds as well as everybody says..:)
 
Axis or EVH guitar into:

Boss Super Overdrive
Line 6 Duoverb 2x 12" (JCM800 sound for Drive, Twin Reverb sound for cleans)

In the FX loop I run a Boss Super Chorus.

Its the best souding rig I have ever used. Plus it doesnt cost the earth and has nice sounding DI's.
 
guitar.... to Dunlop Wah, Ibanez Tubescreamer, Boss CH1, Boss FL2, Sabine Netfx Tuner, DOD delay/sampler, Behringer Tremelo, Beringher Acousitc sim, to Behringer AB box - line a goes to fender hotrod deluxe..... line b to Marshall VS102 (2x12 100w Valvestate & 4x12)


Guitars

2000 Ernie Ball Music Man Axis in Jet Black with matching headstock
2004 Gibson Les Paul Std (Quilted Top)
1984 Gibson Les Paul Custom
2002 Gibson Les Paul Classic
2005 Gibson Es335
1995 Fender USA Strat with Texas Specials
1994 Fender Mex Strat
???? Fender heartfdield Talon 3 Japan
1991 PRS EG3
1997 Wolf EVH
 
EBMM EVH or Silhouette Special --> Fulltone Ultimate Octave --> Teese Picture Wah --> KR Gypsy Fuzz --> Phase 90 --> Arion SCH-1 Chorus --> Fulltone OCD --> Echoplex EP-3 --> Marshall 1959HW Plexi
 
Al into A/B splitter
Mags into PodXT return loop of Marshall 50 tube Combo.
Piezo into AER 60 watt acoustic amp.

Sometimes at home a 6 watt solid state amp from an 60's electric organ into a 6 inch 1950's Speaker enclosure !
 
Last edited:
You must log in or register to reply here.
Classic Rock N Roll Slinky
Back
Top