• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

Pascal

Member
Joined
Jul 3, 2023
Messages
11
Location
France
Hi,

I would like to know the eight of th the two single pickups at factory
On my luke I think there are something under Beccause they don't touch the bottom of the cavity unlike the humbucker
The level sound of the single are little higher than the humbucker
Thanks for the response
Pascal
 

mikeller

Well-known member
Joined
Jan 11, 2007
Messages
2,788
Location
Central Ohio
If I am not mistaken, they are fixed height. Are the screws tighten all the way?

There is a trim pot(s) inside the control cavity board that can be used to balance the volume between the HB and the SC pickups. I'd recommend if you are unsure to contact customer service for guidance
 

DrKev

Moderator
Joined
Jul 8, 2006
Messages
7,470
Location
Somewhere between Paris, Dublin, and Buffalo
just as an FYI - the factory guideline for the Luke pickups are 6/32” (4.75 mm) for the bridge pickup and 5/32” (4.0 mm) for the neck and middle pickups, measured from the bottom of the open low E string to the top of the pole piece.
 
Top Bottom