agt
Well-known member
1.5mm is a bit shy of 4/64 inch, is it not? I have all my Balls strung with 10s or 11s and set up in this ballpark, certainly none higher than 4/64 inch at the low E string/12th fret, and none of my guitars buzz. Then again, it does require some care in adjusting, and the tolerances are fine: if I do get a slight buzz, as can happen due to humidity changes, a very slight tweak of the truss rod and I'm back in action (pun intended, and thanks for the EBMM truss rod adjustment wheel -brilliant design!). This forum is not the place to dispense advice on how to do such adjustments, but I assure you such action is possible. Contact customer service or take your guitar to a competent luthier for a setup.