• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

Frantic Slayer

Well-known member
Joined
Jul 28, 2007
Messages
333
Location
Florida
ok, so im trying to adjust the action, i want the action a lil lower so i put a screw driver in the wheel and pulled up toward my head, holding the bass as if i were to play it...is this the right direction?
 

phatduckk

Well-known member
Joined
Jul 25, 2004
Messages
8,145
Location
San Mateo, California, United States

Rod Trussbroken

Moderator
Joined
Jul 25, 2002
Messages
5,212
Location
Bris Vegas. AUSTRALIA.
Here go FS :D

Truss%20Relief.jpg
 

Frantic Slayer

Well-known member
Joined
Jul 28, 2007
Messages
333
Location
Florida
well the neck looks nice, mostly straight with a little bit of relief, but the action is still a bit to high from where i like it, maybe ill lower the saddles a lil. its at aprox. 3/32" but i want it at 2/32" on the E. also is it normal for the B string action to be a bit higher?

thanks for everything btw!
 

baske

Well-known member
Joined
Aug 5, 2008
Messages
91
Location
Belgium - Menen
Sorry, I was too fast with my question
Just found the answer:
Q: do I need to loosen all of the strings before making a neck relief adjustment?
A: You should make all adjustments with the strings where you would normally play them. Do not loosen the strings to adjust the truss rod.

SeeYa All!!;)
 

Old_Guy

Well-known member
Joined
Feb 17, 2008
Messages
211
Location
Fredericksburg, VA (DC)
150psi salt water knocked me halfway across the compartment your Lordship.
Good lesson tho, never stripped out any bolts in the old MGB, nor have I gooned up my neck relief.
But I digress. What does that Olive Gold Bongo look like? Color resolution on this monitor blows.
 
Top Bottom