• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

jrglick

Member
Joined
Sep 12, 2008
Messages
16
Location
Chicagoland U.S.A.
Jeff from Chicago here. Nice to be here I must say!

By sheer accident, I stumbled upon a MM JP6 at GC (how's that for abbreviating too much). I had two Les Pauls that I couldn't get used to; seems I can never set em' up right even with good techs helping or doing that work. So, I traded and then returned the trade of an SG and spotted and then listened to the voice of a wine red sparkle MM JP6. I was taken aback immediately. Of anything I have ever heard it is the only guitar that nears my McCarty for beautiful cleans and so much more with the piezo. The gent who ordered her was there by coincidence. He opted for a BFR instead so it was the only Balls in the store. His loss was my gain. :)

Of course I am not into the case she came with, yikes, but the rest is sheer joy so far. And this forum is as friendly as any I have ever seen. I admin the Breedlove forum and you guys are really a Family, I can see that, just plain pleasant here! Good going Ballers! Just have few questions for you.

1. What is the best tool to insert into the truss wheel?
2. How in heck to I raise or lower the saddles and is it those teeny allen holes that I can barely see?
3. Why is it so important to flatten the trem bridge? If I pop it just a hair up it helps with some buzzing issues. I just attract buzzing no matter what electric I have other than PRS, not sure what's up with that.

Thanks for reading.

2859678468_08a65b6382_o.jpg


My Balls slideshow on Flickr
 
Last edited:

fogman

Well-known member
Joined
Dec 27, 2004
Messages
12,074
Location
ontario
welcome to the forum Jeff!
Sundays can be slow here but someone will answer all your questions soon.
What is it you don't like about the case it came with? It sounds like they may have given you the wrong one.
 

TNT

Well-known member
Joined
Aug 18, 2005
Messages
3,576
Location
Oakland - Raider Nation!
Hey Jeff!!

I hear Chicago loves MM guitars!!

A level trem keeps the string resting fully/correctly in the cradle.

I use the same allen wrench to turn the wheel.
 

Spudmurphy

Well-known member
Joined
Aug 23, 2005
Messages
12,037
Location
Cardiff, United Kingdom
Welcome to the forum Jeff.

I too have a Les Paul which I rarely use since I fell in love with EB guitars.

Hope you get her set up ok - and just remember ... ... ...

worthless.gif
 

banjoplayer

Well-known member
Joined
Jan 8, 2007
Messages
2,752
Location
Ulm, Germany
Welcome, have fun.
You can insert anything that fits in the truss rod wheel...

From the FAQs on ernieball.com

Q: What size hex (Allen-type) wrench will fit into my truss rod wheel?

A: It doesn't have to be any particular tool - in fact we purposefully made it to where you can use almost anything to adjust it, such as a small screwdriver, hex wrench, or even a nail. At the factory, we typically use 3mm size hex wrenches.
 

MikeVt

Well-known member
Joined
Apr 1, 2005
Messages
1,663
Location
Vermont
I'm curious to know what you don't like about the case as well. I love the standard case - even moreso than the BFR cases...

Mike
 

Sweat

Well-known member
Joined
Dec 31, 2006
Messages
7,346
Location
Texas Finally!
I'm curious to know what you don't like about the case as well. I love the standard case - even moreso than the BFR cases...

Mike

Amen on that Mike much prefer the standard cases, though I really did like the look on the outside of the LE08 case.

Sorry for the highjack, welcome to the forum and glad you found MM guitars, stick around and become addicted, GAS is bad around here.:)
 

MikeVt

Well-known member
Joined
Apr 1, 2005
Messages
1,663
Location
Vermont
Agreed Fing - as much as I like the standard case, the matching LE cases are really cool looking.

I'm still curious to see what the OP doesn't like...

Mike
 

jrglick

Member
Joined
Sep 12, 2008
Messages
16
Location
Chicagoland U.S.A.
I believe it is the SKB hard shell case that seems to have a little too much play in the way the guitar fits and the grey velour seems a bit mousy in color and texture? Does that make sense? It looks something like this, but you guys know better. But it is not too important as the guitar is the main love here. I started looking into why I have two stress cracks near the neck and learned that it could be the case or it could be something completely different. As anal as I am, almost all my guits are near mint, these cracks don't bother me, cuz for the most part you all say to not let it be a factor, as they are common to whatever degree. As far as GAS goes, MM GAS is already in full bloom, heck, I have 5 Breedlove customs and talk about loud, blingy, acoustic masterpieces? My whole forum is fully loaded with GASsy Breedlovers. Thanks for the warm welcome. I love the responses and appreciate the vibe here, we have the same vibe over at the BGMF.
 
Last edited:

jrglick

Member
Joined
Sep 12, 2008
Messages
16
Location
Chicagoland U.S.A.
Chinese Moon Cake Day fun

a little Chinese culture so you know about an obscure holiday that 1.3 billion people celebrate like it is Thanksgiving. A very important family day in China and in my home is the Mid-Autumn Day festival where you put out Moon cake and a drink (?) for the Moon to enjoy, kinda weird but cool. Here is the spread we put out for the Moon on Saturday eve. It was a food fiesta courtesy of my wife the 'cooker'.

Courtesy of Wiki;
The Mid-Autumn Festival, also known as the Moon Festival, is a popular East Asian tradition of Chinese origin[dubious – discuss], dating back over 3,000 years to moon worship in China's Shang Dynasty [1][2][dubious – discuss], that spread to neighbouring cultures like Japan [3]. It was first called Mid-Autumn festival in the Zhou Dynasty [4]. In Malaysia and Singapore, it is also sometimes referred to as the Lantern Festival or Mooncake Festival. The Chinese Lantern Festival is held on the 15 day of the first lunar month.

The Mid-Autumn Festival falls on the 15th day of the 8th lunar month of the Chinese calendar (usually around mid- or late-September in the Gregorian calendar), a date that parallels the Autumn and Spring Equinoxes of the solar calendar. The traditional food of this festival is the mooncake, of which there are many different varieties.

The Mid-Autumn Festival is one of the two most important holidays in the Chinese calendar (the other being the Chinese Lunar New Year), and is a legal holiday in several countries. Farmers celebrate the end of the summer harvesting season on this date. Traditionally, on this day, Chinese family members and friends will gather to admire the bright mid-autumn harvest moon, and eat moon cakes and pomeloes together. Accompanying the celebration, there are additional cultural or regional customs, such as:

* Eating moon cakes outside under the moon
* Putting pomelo rinds on one's head
* Carrying brightly lit lanterns, lighting lanterns on towers, floating sky lanterns
* Burning incense in reverence to deities including Chang'e (simplified Chinese: 嫦娥; traditional Chinese: 嫦娥; pinyin: cháng'é)
* Planting Mid-Autumn trees
* Collecting dandelion leaves and distributing them evenly among family members
* Fire Dragon Dances


2859701404_958b4598f8_o.jpg
 

jrglick

Member
Joined
Sep 12, 2008
Messages
16
Location
Chicagoland U.S.A.
Don't forget fellers, ;) I need an answer on this:

"2. How in heck to I raise or lower the saddles and is it those teeny allen holes that I can barely see? "

Also, what is the real name of this wine sparkle color I bought. Candy red sparkle, wine sparkle?

Ok. Thank you.
 

andynpeters

Well-known member
Joined
Dec 28, 2004
Messages
1,378
Location
Wonderland
Don't forget fellers, ;) I need an answer on this:

"2. How in heck to I raise or lower the saddles and is it those teeny allen holes that I can barely see? "

Also, what is the real name of this wine sparkle color I bought. Candy red sparkle, wine sparkle?

Ok. Thank you.

Yes, you use the teeny allen key that usually comes with it....fairly generally available if you don't have it
 

mbgreene

Well-known member
Joined
Sep 8, 2004
Messages
2,556
Location
Rockland County, NY
Welcome

Yes - its the little allen screws, But check out the FAQ's on set ups and truss rod adjustments for buzz issues before you start playing with saddle heights.

http://www.ernieball.com/faq_content.php?subjectcode=mm_guitars

Looks like Radiance Red based on the picture, which was a limited edition color from 2004 that was later added to the standard color choices, but has just recently been discontinued. If you add the serial # to the official serial # thread you can ask for a DOB as well as a confirmation of the color.
 
Top Bottom