• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

dfrady

Well-known member
Joined
Aug 24, 2003
Messages
800
Location
West Virginia
Question #1:
On my honeyburst Axis, i have it strung up with 10's and tuned 1/2 step down, the action at the 12th fret on the low E string measures 7/64, what steps are required to achieve a 1/16 action ??

Question #2:
On my trans. red Axis, i have it strung up with custom light (9-46) strings, and i am getting some light buzz on all strings except the high E when played high on the neck (it's just enough to get on your nerves) the action on the 12th fret on the low E is 3/32. What steps are required to eliminate this problem ?? (i will also be installing D-Tuna on this guitar tomorrow).
:cool:
 

tommyindelaware

Well-known member
Joined
Dec 24, 2002
Messages
3,274
Location
wilmington , delaware
both questions require more info than u have given........to be able to answer .....
are your frets level?
is your neck flat.......
are your saddles radiused correctly???
how much truss rod relief is in play??
is your bridge height correct w/ reguard to your upper fret's action ?????


dfrady said:
Question #1:
On my honeyburst Axis, i have it strung up with 10's and tuned 1/2 step down, the action at the 12th fret on the low E string measures 7/64, what steps are required to achieve a 1/16 action ??

Question #2:
On my trans. red Axis, i have it strung up with custom light (9-46) strings, and i am getting some light buzz on all strings except the high E when played high on the neck (it's just enough to get on your nerves) the action on the 12th fret on the low E is 3/32. What steps are required to eliminate this problem ?? (i will also be installing D-Tuna on this guitar tomorrow).
:cool:
 

dfrady

Well-known member
Joined
Aug 24, 2003
Messages
800
Location
West Virginia
I am going to answer your questions as best i can tommy, just keep in mind i am a novice at guitar set-up.

1. Are your frets level? Yes

2. Is your neck flat? Not completely

3. Are your saddles radiused correctly? Yes

4. How much truss rod relief is in play? Just a little

5. Is your bridge height correct w/ regaurds to your upper frets? I don't know
 
Last edited:

Colin

Well-known member
Joined
Jan 23, 2005
Messages
10,649
Location
Brisbane Queensland
dfrady said:
Question #1:
On my honeyburst Axis, i have it strung up with 10's and tuned 1/2 step down, the action at the 12th fret on the low E string measures 7/64, what steps are required to achieve a 1/16 action ??

Question #2:
On my trans. red Axis, i have it strung up with custom light (9-46) strings, and i am getting some light buzz on all strings except the high E when played high on the neck (it's just enough to get on your nerves) the action on the 12th fret on the low E is 3/32. What steps are required to eliminate this problem ?? (i will also be installing D-Tuna on this guitar tomorrow).
:cool:

My advice would be take it to reputable repairer. It's a bit like owning a car we wash it, pump up the tires and occasionally change the oil and filters. But then we still take it to the mechanic for a tune up. I would recommend at least getting it set up initially until your comfortable to do it yourself.

Colin
 

dfrady

Well-known member
Joined
Aug 24, 2003
Messages
800
Location
West Virginia
Colin said:
I would recommend at least getting it set up initially until your comfortable to do it yourself.

Colin

I am comfortable doing it myself if someone could tell me what needed to be done.
:cool:
 
Top Bottom