alf cockle
Well-known member
Can anyone out there advise me on a good cable to use for my piezo equipped axis sport?Tx.
-
Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.
cable for piezo eqipped guitars
- Thread starter alf cockle
- Start date
BUC
Well-known member
Yeah, I'm surprised these are so hard to find. Anyone find a better deal than this one?
Pro Co PARKER20 Magnetic/Piezo Guitar Y-Cable - 20' | Sweetwater.com
I can find splitters, but not with a 90 TRS on one end that are longer than 10'
Pro Co PARKER20 Magnetic/Piezo Guitar Y-Cable - 20' | Sweetwater.com
I can find splitters, but not with a 90 TRS on one end that are longer than 10'
DJ.
Well-known member
Pete Dubaldo can fix you up. I got mine from him.
Good Luck!
Good Luck!
I highly recommand rainwater sound (rainwatersoundllc) on ebay. The guys make awesome cables with gold neutrik connector and mogami cable for a really good price !! I order all my cables for my rig there. I had him to make me a custom cable for my jp bfr, a 20' cable with an angled str connector to a Y. It cost me like 35$. Then I programmed my fx unit (line 6 pod hd pro) to select between the piezo and magnetic for the choosen patch so i don't have to touch the p/m selector.
Screamindv
Active member
The Planet Waves cable above, while it has a good price, there are some drawbacks.
1. There are 2 cables drawn together from the start of the 1/4 inch stereo plug and go the entire length of the 20 foot cable terminating at 2 TS plugs. The good is that you can seperate the 2 cables and make them spread as far apart as you want. In my case, one end goes into a Fat Boost at the bottom of my pedalboard and the other end goes into my Fishman Aura pedal at the top of the board. The bad; the cable is heavier since it isa essentially 2 cables and it doesnt moove well on stage and it tangles and twists very easily.
2. The TRS plug is straight. I find that the placement of the the guitar's output jack prefers a right angled cable. If you put your guitar on the floor or a low stand with a straight jack in it, it is very easy to damage the jack or the PCB that it it is attached to. The ProCo above is much more expensive but is a far better choice. Just my observation from having owned a Planet Waves version.
1. There are 2 cables drawn together from the start of the 1/4 inch stereo plug and go the entire length of the 20 foot cable terminating at 2 TS plugs. The good is that you can seperate the 2 cables and make them spread as far apart as you want. In my case, one end goes into a Fat Boost at the bottom of my pedalboard and the other end goes into my Fishman Aura pedal at the top of the board. The bad; the cable is heavier since it isa essentially 2 cables and it doesnt moove well on stage and it tangles and twists very easily.
2. The TRS plug is straight. I find that the placement of the the guitar's output jack prefers a right angled cable. If you put your guitar on the floor or a low stand with a straight jack in it, it is very easy to damage the jack or the PCB that it it is attached to. The ProCo above is much more expensive but is a far better choice. Just my observation from having owned a Planet Waves version.
Lewis Brunton
Active member
- Joined
- May 3, 2011
- Messages
- 44
Anyone know where you can get the pro co cable in the UK? P&P from Sweetwater to the UK works out at the same price as the cable!l on its own!
