• Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.

JP model volume and tone problems

beej

Moderator
Joined
Aug 16, 2004
Messages
12,540
Location
Toronto, Canada
So this is happening in both guitars when the signal chain is passive?

If so, the issue is likely happening after the guitar. Have you tried another cable? Sounds like something is grounding out. Try eliminating everything after the guitar- different cable, right into your amp, etc. Process of elimination.
 
So this is happening in both guitars when the signal chain is passive?

If so, the issue is likely happening after the guitar. Have you tried another cable? Sounds like something is grounding out. Try eliminating everything after the guitar- different cable, right into your amp, etc. Process of elimination.
Yes both guitars except when using active jack on jp7, which when toggle switched to d sonic and air all works great.
It’s only when using the passive jack when there’s low output gain and noisy volume pot. My JP 6 doesn’t have a piezo so it’s passive only.
When I plug my majesty 7 in everything is great. So I don’t know. I’ll try again checking the chain.
 
Yes both guitars except when using active jack on jp7, which when toggle switched to d sonic and air all works great.
It’s only when using the passive jack when there’s low output gain and noisy volume pot. My JP 6 doesn’t have a piezo so it’s passive only.
When I plug my majesty 7 in everything is great. So I don’t know. I’ll try again checking the chain.
Ok, I may have discovered something. Hooked up my mark v mess and Everything works great so far through it. For awhile I’ve been using only an interface using archetype plugins to iMac, so it may be something in that chain.
Thanks
 
Back
Top