GoKart Mozart
Well-known member
Yep...I was messing around with the trim pots and forgot to write down their original positions. Could any of you fine folks take a look at yours and see what they're set at?
-
Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.
Luke III owners - need help (trim pot question)
- Thread starter GoKart Mozart
- Start date
GoKart Mozart
Well-known member
Bump
toma
New member
- Joined
- Mar 2, 2013
- Messages
- 3
Hi
To set the trimpots back to the factory setting you will probably have to contact customer service and ask if they can give you the specs and the information on how to do it.
You will need a ohm meter and information on where to do the measurements.
The value for trimpot A is different for HH and HSS while the measurement for trim B is the same for both models.
Its very easy to do but without the right values you will not get it right.
Plan B would of course be to just trust your ears and listen to what sounds good to you and not worry to much about the factory settings.
I hope this helps.
To set the trimpots back to the factory setting you will probably have to contact customer service and ask if they can give you the specs and the information on how to do it.
You will need a ohm meter and information on where to do the measurements.
The value for trimpot A is different for HH and HSS while the measurement for trim B is the same for both models.
Its very easy to do but without the right values you will not get it right.
Plan B would of course be to just trust your ears and listen to what sounds good to you and not worry to much about the factory settings.
I hope this helps.
