GoKart Mozart
Well-known member
Yep...I was messing around with the trim pots and forgot to write down their original positions. Could any of you fine folks take a look at yours and see what they're set at?
- Thread starter GoKart Mozart
- Start date
GoKart Mozart
Well-known member
Bump
toma
New member
- Joined
- Mar 2, 2013
- Messages
- 3
Hi
To set the trimpots back to the factory setting you will probably have to contact customer service and ask if they can give you the specs and the information on how to do it.
You will need a ohm meter and information on where to do the measurements.
The value for trimpot A is different for HH and HSS while the measurement for trim B is the same for both models.
Its very easy to do but without the right values you will not get it right.
Plan B would of course be to just trust your ears and listen to what sounds good to you and not worry to much about the factory settings.
I hope this helps.
To set the trimpots back to the factory setting you will probably have to contact customer service and ask if they can give you the specs and the information on how to do it.
You will need a ohm meter and information on where to do the measurements.
The value for trimpot A is different for HH and HSS while the measurement for trim B is the same for both models.
Its very easy to do but without the right values you will not get it right.
Plan B would of course be to just trust your ears and listen to what sounds good to you and not worry to much about the factory settings.
I hope this helps.
