GHWelles
Well-known member
Ot: PEDALBOARDS - Guitar pedalboard done
Finished my pedalboard
Left to Right:
1. Digitech Digidelay - Splits signal into stereo for use with 2 amps.
2. Dano Fish n'Chips EQ
3. True Bypass Looper - 5 loops
4. True Bypass Looper - 4 loops (I built this one using an old Morely case from the 80's)
5. Morley Deluxe Flanger 1981. (Killer, runs direct into the Dano EQ to boost and eq the flanger).
6. Morely Analog Echo - 600ms with MN3005 chips. - 1980's).
7. Morely Deluxe Distortion - (80's. I modified the heck out of this one, replaced the slicon clipping diodes with a Zener diode and a Mosfet for asymetrical soft clipping. I also changed the low pass cap value for more bass. Amazingly tube-like.)
8. Dano Surf n'Turf compressor. (Great, replaced my 80's pre-Dunlop Dyna Comp.)
9. Morley Compact Volume pedal - 1980's w/ 50K slider pot. (Small!).
10. Another Dano Fish n' Chips EQ (right after the Morely Distortion to tailor eq.)
11. Another Digitech Digidelay.
12. Tube Screamer (modified by AnalogMan to Ts-808 spec)
13. DOD 80's FX-40 EQ. (Very nice quality unit but old as heck).
14. Danelectro Chicken Salad Vibe (I re-housed this into a Crybaby wah shell and made into a Rotovibe with the treadle controlling vibe speed.)
15. Dime Custom Wah (I modified to include an on/off LED without affecting true bypass.)
16. Boss TU-3 that also serves as a buffer at the beginning of the true bypass chain.
The board is set up as true bypass with a buffer at the beginning (Tu-3) and a buffer at the end (Digidelay).
Finished my pedalboard
Left to Right:
1. Digitech Digidelay - Splits signal into stereo for use with 2 amps.
2. Dano Fish n'Chips EQ
3. True Bypass Looper - 5 loops
4. True Bypass Looper - 4 loops (I built this one using an old Morely case from the 80's)
5. Morley Deluxe Flanger 1981. (Killer, runs direct into the Dano EQ to boost and eq the flanger).
6. Morely Analog Echo - 600ms with MN3005 chips. - 1980's).
7. Morely Deluxe Distortion - (80's. I modified the heck out of this one, replaced the slicon clipping diodes with a Zener diode and a Mosfet for asymetrical soft clipping. I also changed the low pass cap value for more bass. Amazingly tube-like.)
8. Dano Surf n'Turf compressor. (Great, replaced my 80's pre-Dunlop Dyna Comp.)
9. Morley Compact Volume pedal - 1980's w/ 50K slider pot. (Small!).
10. Another Dano Fish n' Chips EQ (right after the Morely Distortion to tailor eq.)
11. Another Digitech Digidelay.
12. Tube Screamer (modified by AnalogMan to Ts-808 spec)
13. DOD 80's FX-40 EQ. (Very nice quality unit but old as heck).
14. Danelectro Chicken Salad Vibe (I re-housed this into a Crybaby wah shell and made into a Rotovibe with the treadle controlling vibe speed.)
15. Dime Custom Wah (I modified to include an on/off LED without affecting true bypass.)
16. Boss TU-3 that also serves as a buffer at the beginning of the true bypass chain.
The board is set up as true bypass with a buffer at the beginning (Tu-3) and a buffer at the end (Digidelay).
Last edited:
