I have recently purchased a EBMM Bongo 4 string HH and I think it is great. One con was a little tinny sounding. I use spector nickle strings on my spector and they have a really warm sound. I was thinking of trying some spector strings on the Bongo. Anyone out there tried spectors on a Bongo or have any other suggestions??
- Thread starter slucas
- Start date
Psychicpet
Well-known member
?? tinny??
where was the eq on the Bongo set ? Now, do you mean 'tinny' as thin sounding or tinny as clanky metallic sounding?
I use nickels and the Bongo was strung from the factory with EB nickels so the Spectors should work, and if you're used to their sound already then I'd say it's worth a try.
where was the eq on the Bongo set ? Now, do you mean 'tinny' as thin sounding or tinny as clanky metallic sounding?
I use nickels and the Bongo was strung from the factory with EB nickels so the Spectors should work, and if you're used to their sound already then I'd say it's worth a try.
Psychicpet
Well-known member
ps. I know that the sound of a Bongo is going to have more mids (upper especially) in it compared to an EMG equipped Spector so maybe that "tinny-ness" is the openess of the Bongo p/u's and pre-amp. NOT better or worse than the Spector just different. Like the difference between a spruce top and a cedar top on an acoustic guitar.
barkatozz
Well-known member
I have 5 Bongos....all strung w. Slinkys.....none of them sound "tinny".slucas said:
Got 2 bongos and 3 EMG-equipt Spectors. To me, they are the closest 'cousins' in my stable [OK, the GnL is closely related as well, but it's not an EMG bass]. The Bongos differ from the Spectors mainly in being less percussive, but ignoring percussiveness, both the Bongos and the Spectors share a huge house-shaking bottom and powerful lower middle. I can't see how anyone could call a Bongo "tinny" unless there's some problem with it. Have you tried new batteries?Psychicpet said:
As someone who greatly favors flatwounds, I can say that the Spectors are not my thing *at all* with roundwounds, true for me concerning just about any bass ever made, however .... Bongos I can dig with RW or flats, maybe the only bass anywhere that I really dig with RW's. If Bongos could sound tinny, I could never dig them with RW's. Even the GnLs I do not like with RW's. To me, the Bongo is the last bass anywhere anytime I could ever imagine calling tinny. Either you need batteries or there is a real problem with that ax.
Last edited:
AnthonyD
Well-known member
+1Golem said:
What I was thinking before even opening this thread...
EasyTiger
Well-known member
+2 "Tinny" is the last thing I'd say about a Bongo!
Let me re-state.
Hey everyone, let me say I just meant it sounded a little tinny compared to the spector with spector strings. i. e. I once put a set of Hybrid Slinky's on my Spector and they came off the very next day. Just sounded clangier and thinner. I thought the Spector strings on the Bongo may have somewhat a reverse effect. I guess I just need to spend the $25 and find out as those strings sounded soooooooo much richer to me. Don't get me wrong, I love my new Bongo and hope I did not offend any of you Bongoloids out there, as I consider myself one now too.
slucas said:
Hey everyone, let me say I just meant it sounded a little tinny compared to the spector with spector strings. i. e. I once put a set of Hybrid Slinky's on my Spector and they came off the very next day. Just sounded clangier and thinner. I thought the Spector strings on the Bongo may have somewhat a reverse effect. I guess I just need to spend the $25 and find out as those strings sounded soooooooo much richer to me. Don't get me wrong, I love my new Bongo and hope I did not offend any of you Bongoloids out there, as I consider myself one now too.
bovinehost
Administrator
No offense here. I was just trying to figure out how you got a Bongo to sound tinny!
