• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

banjoplayer

Well-known member
Joined
Jan 8, 2007
Messages
2,752
Location
Ulm, Germany
I´ve read here, that the Silo-SSS was discontinued? Why and when? Does someone know?

What´s the difference between a SSS-Silo and a SSS-Silo-Spec?
I know - 2 more frets, but other diefferences?

Thanksalot guys!
 

GWDavis28

Well-known member
Joined
Jun 23, 2003
Messages
12,746
Location
Mass
I´ve read here, that the Silo-SSS was discontinued? Why and when? Does someone know?

What´s the difference between a SSS-Silo and a SSS-Silo-Spec?
I know - 2 more frets, but other diefferences?

Thanksalot guys!

That has been like that for a long, long time.

Basically the difference between a Silo and a Silo Special are that the Silo is 24 frets and the Special is 22 fret. The Silo is now a pup config of HSH and the Special is either SSS and SSH only.

Glenn |B)
 

Ripper

Well-known member
Joined
Oct 6, 2006
Messages
1,093
Location
Singapore
Silo SSS = No silent circuit.

Silo Spec SSS = Silent circuit = Good!!!

Btw, the silo SSS did not actually "discontinued". You can still get a SSS routed silo pickguard to configure a SSS setup. But do you like your single coil neck pup to be far away from the nut? and also, the absence of the silent circuit? ;)
 

DaPatrooch

Well-known member
Joined
Nov 7, 2007
Messages
1,017
Location
Philly
The thing I don't understand about the whole neck pickup single coil thing not sounding very good with a 24 fret neck is the scale length is the same as the 22 fret neck, so could someone explain this to me?
 

ShaneV

Well-known member
Joined
Apr 5, 2004
Messages
840
Location
New Hampshire, under some snow.
The thing I don't understand about the whole neck pickup single coil thing not sounding very good with a 24 fret neck is the scale length is the same as the 22 fret neck, so could someone explain this to me?

It isn't about the scale length, it's about teh actual location of the pickup. On a 22 fret neck, the pickup goes directly under where the 24th fret would be. Obviously, it can't be there on a 24 fret neck, so it gets moved closer to the bridge, which changes the sound.
 

whitestrat

Well-known member
Joined
Aug 13, 2007
Messages
2,589
Location
The Little Red Dot
The thing I don't understand about the whole neck pickup single coil thing not sounding very good with a 24 fret neck is the scale length is the same as the 22 fret neck, so could someone explain this to me?

It's not scale length. It's a natural harmonic position. If you look at it in cross section, and pluck an open string, you'll find that the largest amplitude is generally at 2 positions, which is the 24th fret and 6th fret (I think). Placing a pickup there would give the most "open" tone, which also tends to be the loudest position. Shifting the pickup away from that position would mean picking up the vibrations at a different amplitude, which is smaller than the instrument's natural hamonic point. Akin to getting position 4 (neck + middle) on a SSS 22 fret config.

Likewise, if you use the neck pup on a 22 fret SSS guitar, and you play the 5th fret harmonic on any string, you'll hear nothing, mainly because that string length (shortened by your finger) would generate 0 amplitude at the neck pup, which is why you can only hear that on either the middle or the bridge pup.
 

DaPatrooch

Well-known member
Joined
Nov 7, 2007
Messages
1,017
Location
Philly
Thanks guys, that helps, but isn't scale length the length of the nut to the last fret? If the scale length is the same on a 22 fret and 24 fret guitar, wouldn't it not make a difference? I get where you're going though. Sorry I'm a total noob about this stuff haha. Oh and sorry if I kinda hijacked your thread.
 

whitestrat

Well-known member
Joined
Aug 13, 2007
Messages
2,589
Location
The Little Red Dot
Thanks guys, that helps, but isn't scale length the length of the nut to the last fret? If the scale length is the same on a 22 fret and 24 fret guitar, wouldn't it not make a difference?

No, scale length refers to the playable length of string. Meaning, from nut, to bridge. an LP is a 24.75" scale length. The EBMM guitars are 25.5" lengths. The baritones are 27" to 29". Bass guitars, I think are 30+"???
 

whitestrat

Well-known member
Joined
Aug 13, 2007
Messages
2,589
Location
The Little Red Dot
Sorry, Silo and Silo Spec.

The shapes are the same... But I think (and it could just be me) that the Silo is a bit thinner... Then again, because the neck for the Silo spec is shorter, they probably used the same template to carve this neck, and therefore, the 5th fret on the Spec neck could be the same thickness as the 7th fret on the Silo? Not sure...
 

banjoplayer

Well-known member
Joined
Jan 8, 2007
Messages
2,752
Location
Ulm, Germany
Silo SSS = No silent circuit.

Silo Spec SSS = Silent circuit = Good!!!

Btw, the silo SSS did not actually "discontinued". You can still get a SSS routed silo pickguard to configure a SSS setup. But do you like your single coil neck pup to be far away from the nut? and also, the absence of the silent circuit? ;)


Thanks, good answer. It´s not really a matter what I like. It´s an occasion to pick a SSS-Silo rather cheap on ebay. So I don´t have the choice as if I would order one. And SSS-Silos or Silo-Specs are rather seldom on german ebay.
 
Top Bottom