• Ernie Ball
  • MusicMan
  • Sterling by MusicMan
Ernie Ball Music Man Custom Design Experience

Yo Figgy

TSanders

TSanders

Well-known member
Joined
Jun 9, 2004
Messages
3,535
Location
Columbus, GA
I saw that you were looking for some GK sound clips. While I cant do any specific ones right now, I think Im going to be able to help you out.

Ive been working on a couple projects that I got a call for a while back.

Im going to call the studio engineer, and see if he will get me the three or four rough mixes he has with my GK rig recorded. Ill burn em and mail you a CD when he gets em to me.

PM me your addy, and Ill get the ball rolling today.
 
Motojunkie

Motojunkie

Well-known member
Joined
Aug 5, 2005
Messages
468
Location
Goodyear, AZ
I find that I like standard tuning a bit better.....

It's probably just because I've been tuning to standard tuning for 20 years, and I've been tuning to Eb for about 3 weeks.
 
Bill

Bill

Well-known member
Joined
Sep 4, 2005
Messages
2,317
Location
Denham Springs, LA
I just about had a religious experience at my gig tonight after using my new 1001RB-II for the first time. :D My SR4 has never sounded so good!
 
shamus63

shamus63

Well-known member
Joined
Aug 8, 2005
Messages
4,018
Location
San Mateo, CA
Bill said:
I just about had a religious experience at my gig tonight after using my new 1001RB-II for the first time. :D My SR4 has never sounded so good!
Click to expand...

I am sooo tempted to sell off my B2R and 700RB for a 1001RB-II head!

I could just use my 410BLX-II and one 115BLX-II cab with that, instead of lugging half a bass dept's worth of stuff with me...although the reactions when I set up are photo-worthy! :eek: :D
 
Colin

Colin

Well-known member
Joined
Jan 23, 2005
Messages
10,649
Location
Brisbane Queensland
Motojunkie said:
I find that I like standard tuning a bit better.....

It's probably just because I've been tuning to standard tuning for 20 years, and I've been tuning to Eb for about 3 weeks.
Click to expand...
Tuning down can be rubberband city for the bass player.
 
shamus63

shamus63

Well-known member
Joined
Aug 8, 2005
Messages
4,018
Location
San Mateo, CA
Randracula said:
It would give each cab 350 watts.You could blow the 15 if your not careful....but you'd probably be alright
Click to expand...

I read elsewhere that when you have two cabs with the same ohm rating, but different power handling ratings, the majority of the power is distributed to the higher-rated cab...yes/no?

In regards to overpowering the cab, isn't the prefered power ratio supposed to be around 2:1, so as not to clip (thereby frying your voice coils)?

BTW ~ I love getting back to real discussions. ;)
 
Randracula

Randracula

Well-known member
Joined
Jul 10, 2005
Messages
2,485
Location
Fontana,CA,In The Valley Of The Dirt!
shamus63 said:
I read elsewhere that when you have two cabs with the same ohm rating, but different power handling ratings, the majority of the power is distributed to the higher-rated cab...yes/no?

In regards to overpowering the cab, isn't the prefered power ratio supposed to be around 2:1, so as not to clip (thereby frying your voice coils)?

BTW ~ I love getting back to real discussions. ;)
Click to expand...
Yeah but GK's seem to have little more juice than something like an SWR with a similar power rating so I would be careful.I've seen 800RB's wreak havoc on Hartke cabs before. If you double the power of the cab you will get a cleaner sound with less work out of the amp but if you turn it up too loud you can still blow your speaker or fry a voice coil.You just have to watch your volume and EQ.It's still better than being underpowered and trying to turn your amp up louder than it can go. That's and instant recipe for square wave speaker damage:eek:
 
You must log in or register to reply here.
Top Bottom